Edelbrock 77389 - Edelbrock SB-Ford Heads
Edelbrock #350-77389Ford 289-351W Victor Jr. Aluminum Cylinder Head |
||||
|
||||
|
|
||||
Edelbrock 77389 - Edelbrock SB-Ford Heads Details
Ford 289-351W Victor Jr. Aluminum Cylinder Heads
With 500+ HP potential out-of-the-box, these heads have the same competition proven features as the Victor Jr. Ford heads but with 70cc combustion chambers. The 70cc combustion chambers are ideal for turbocharged and supercharged applications that require a lower staic compression ratio. Other feautre include CNC gasket-matched port entries and exits with blended valve bowls. The spark plug holes and valves are in the stock location with .150'' raised valve cover rail. A groove in the deck surface allows most roller lifters to be changed without removing the heads. Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.
Performer & Performer RPM Heads for Street Legal and Street High-Performance Victor Jr. and Victor Series Heads
These street high-performance heads provide out of the box, bolt-on performance with no additional porting required. They offer improved power throughout the rpm range for great throttle response and top-end horsepower. The intake and exhaust runners are CNC-profiled for superior flow and performance. Standard port location allows the use of Edelbrock Performer, Performer RPM, Torker II and Victor Jr. intakes as well as others of a similar design. Stock location of the exhaust flange allows the use of stock exhaust or headers. Other features include hand blended intake and exhaust bowls and hardened interlocking valve seats for use with leaded or unleaded fuel. All Performer and Performer RPM heads are assembled with these high-quality components: stainless steel, 1-piece swirl-polished intake and exhaust valves with under-cut stems; 2-ring positive oil control seals; rocker studs; hardened steel guideplates; valve springs, retainers and keepers. In most cases, these heads are directly interchangeable with the factory heads.
Performer heads have provisions for all exhaust emissions related components and are street legal, while the Performer RPM heads are for non-emission vehicles.
Victor Jr. and Victor Series heads are designed for maximum horsepower. Victor Jr. heads are ideal for many types of competition and ultra-high performance street machines. Victor Series heads are one step above for even greater gains in horsepower. All these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports and specially contoured combustion chambers. Extra thick deck surfaces provide maximum head gasket retention with high-compression ratios. Use head bolt kit #350-8552 or 350-8553.
