Engine Control Kit
The FAST EZ-EFI 2.0 Fuel Ignition Self Tuning Engine Control Kit is the easiest way to get your LS transplant up and running without all the complex PCM flashing and harness reworking required with the stock unit. This kit features all of the advantages of the award-winning EZ-EFI 2.0 system, plus it includes the EZ-LS Ignition Controller and utilizes stock or aftermarket LS injectors, sensors and coils. With the included ignition controller, the user can easily get running or optionally adjust timing.
Specifications:
Will this work will nitrous set up
Is this system use able with the race iq3 dash monitor?
Will this system work with a LQ4 6.0L with coil packs? Also does this system have transmission control for a 4L60E transmisson
I have a 280 z w/ new LS3 crate Moter mounted to a camaro 6 speed tranny A older badly turned Ecu that had a bad speed sensor on the transmission that caused me fits Until replaced No ignition switch, will this solve my tune problems without dyno
Is it boost capable
Does this system work in a closed loop? Is there any documentation or diagram, so I can prepare all the parts required?
Will this work with a th350?
Will this system work with factory Ls truck injectors and coils ?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.