FiTech30064 Go EFI 2x4 1200 HP Power Adder Throttle Body System Basic Kit

The Go EFI 2×4 Power Adder 1200HP Matte Black Self-Tuning Fuel Injection system is rated at 1200hp but is suitable for engines from 400hp thru 1200hp. This Kit is for the guys who have 671 and 871 roots superchargers or make up to 1200hp naturally aspirated on their dual quad setup. FiTech EFI has made it simple with their Go EFI 2×4 Power Adder 1200hp self-tuning system. Works out of the box on your 2×4 blower plate as an inline setup or can be side mounted using custom linkages. Also, this kit is a bolt on for the most popular normally aspirated dual quad and tunnel ram manifolds including the Edelbrock line of dual quad manifolds without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains while the second holds 4 additional injectors. These can also be used in cross ram and tunnel ram configurations.

Breakdown of Included Items

Throttle Body Dimensions

Hand-Held Controller Quick Start Guide

Features:

• Two 4-Injector Boost Ready Throttle Bodies in Matte Black Finish
• Fits Inline on 2x4 Blower Manifolds, Dual Quad Manifolds and Tunnel Ram Manifolds (linkage and fuel line NOT included)
• Boost Ready ECU 2.5 Bar Internal MAP Sensor (25 psi)
• Nitrous Control with Safety Features and Accessories for Nitrous Tuning
• Nitrous and Boost Specific Target Air Fuel Ratio Target Options
• Boost and Nitrous Timing Retard Strategies
• Two Fan Controls (can set at separate temperatures)
• Air-Conditioning Idle Speed Input Kick Up
• Advanced Hand-Held Tuning Mode
• Pro Laptop Software
• 8-Injectors Capable of Flowing 1200 HP of Fuel (1000 HP Boosted)
• Built-in Fuel Pressure Regulator
• Self-Tuning
• Basic Install with Only 4 Wires and 2 Sensors
• Bosch 4.2 Wide Band O2 Sensor
• Compact Externally Mounted ECU on the Throttle Body
• Voltage Control Fuel Pump Control
• Wet Flow Technology
• Swirl Spray Annular Discharge Design
• Inlet Fitting: 9/16 in. -24 to 6AN
• Return Fitting: 10 mm x 1.25 to 6AN

• Applications: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 250 HP up to 1200 HP with a dual quad intake manifold.
• Replacement for any dual quad carburetors for engines with 250 HP up to 1200 HP.
• Use the same size air cleaner you would normally use for your dual quad carburetors.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART