Jegs Free Catalog
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Category
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Fidanza 186541

Lightweight Aluminum Flywheel 1958-70 Ford FE 332/352/390/406/410/427/428

Fidanza 186541

383-186541

made in usa
jegs shipping
FREE Shipping
Estimated ship date 05/04/17 if Ordered Today
Fidanza 186541 Lightweight Aluminum Flywheel 1958-70 Ford FE 332/352/390/406/410/427/428 $335.99
Lightweight Aluminum Flywheel
  • 1958-70 Ford FE 332/352/390/406/410/427/428
  • 14 lbs

  • Specifications:

    Manufacturer's Part Number:
    186541

    Factory flywheels are heavy and large in diameter. It takes an immense amount of power just to get them rotating, but with an aluminum flywheel takes less than half that.

    Fidanza Aluminum Flywheels are made from 6061-T6 aluminum. The friction surface is an incredibly strong 1050 steel attached with Grade 8 button screws. These flywheels can be used with any type of clutch material. The ring gear is also made from 1050 steel and is heat treated for durability. Fidanza designs and builds flywheels with extreme precision.

    Does Fidanza 186541 fit your vehicle?

    Narrow Results

    1969-1970 FORD CUSTOM 500

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1967 FORD RANCHERO

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: 500 XL
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1970 FORD RANCH WAGON

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: POLICE CRUISER
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1968 FORD FAIRLANE

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: 500
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1958-1959 FORD SKYLINER

    • CC: 5441
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 332
    • EngineType: V8 ( 5.4 L / 332 )

    1968 FORD FAIRLANE

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: 500
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1960 FORD SUNLINER

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1964-1967 FORD THUNDERBIRD

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • EngineType: ALL
    • SubModel: ALL

    1962-1964 FORD FAIRLANE

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1969 FORD FAIRLANE

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: 500
    • Engine Vin: R
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1958-1959 FORD RANCH WAGON

    • CC: 5917
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1968 FORD MUSTANG

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • EngineType: ALL
    • SubModel: SHELBY GT-500KR

    1960 FORD THUNDERBIRD

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1965 FORD FAIRLANE

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1968-1970 FORD MUSTANG

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1962-1964 FORD GALAXIE 500

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: SUNLINER
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1966 FORD FAIRLANE

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1969 FORD TORINO

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: SQUIRE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1968 FORD LTD

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1967 FORD GALAXIE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1958-1959 FORD FAIRLANE

    • CC: 4786
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1958-1959 FORD VICTORIA

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 223
    • EngineType: L6 ( 3.7 L / 223 )

    1961 FORD FAIRLANE

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1965-1967 FORD FAIRLANE

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1961-1968 FORD RANCH WAGON

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1970 FORD RANCH WAGON

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1970 FORD LTD

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BROUGHAM
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1962-1963 FORD THUNDERBIRD

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1965-1966 FORD COUNTRY SQUIRE

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1960-1966 FORD FAIRLANE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: 500
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1967-1969 FORD COUNTRY SQUIRE

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1958 FORD RANCHERO

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: CUSTOM
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1966-1967 FORD GALAXIE

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1968-1969 FORD RANCH WAGON

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1958-1959 FORD SUNLINER

    • CC: 5917
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1958-1959 FORD F-100

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1968 FORD GALAXIE 500

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: XL
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1959 FORD GALAXIE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 223
    • EngineType: L6 ( 3.7 L / 223 )

    1966 FORD COUNTRY SQUIRE

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1964-1965 FORD FAIRLANE

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1970 FORD COUNTRY SEDAN

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: P
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1969 FORD FAIRLANE

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: 500
    • Engine Vin: P
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1969 FORD TORINO

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: SQUIRE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1970 FORD MUSTANG

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: GRANDE
    • Engine Vin: J
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1970 FORD MUSTANG

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: MACH I
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1965 FORD COUNTRY SQUIRE

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1970 FORD COUNTRY SEDAN

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1965-1967 FORD GALAXIE 500

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1965-1966 FORD LTD

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1958-1959 FORD FAIRLANE

    • CC: 5441
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 332
    • EngineType: V8 ( 5.4 L / 332 )

    1970 FORD MUSTANG

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: Z
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1958-1959 FORD SKYLINER

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1962-1967 FORD COUNTRY SQUIRE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1968 FORD GALAXIE 500

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1970 FORD LTD

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: X
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1959 FORD GALAXIE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1958-1959 FORD VICTORIA

    • CC: 5441
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 332
    • EngineType: V8 ( 5.4 L / 332 )

    1962-1970 FORD COUNTRY SEDAN

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1970 FORD MUSTANG

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: GRANDE
    • Engine Vin: Z
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1967 FORD COUNTRY SEDAN

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1958-1959 FORD FAIRLANE

    • CC: 3655
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 3.6
    • SubModel: BASE
    • CUI: 223
    • EngineType: L6 ( 3.6 L / 223 )

    1958-1959 FORD COUNTRY SEDAN

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1970 FORD RANCH WAGON

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: POLICE CRUISER
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1963 FORD THUNDERBIRD

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1970 FORD RANCH WAGON

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1958-1959 FORD RANCHERO

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1962-1964 FORD GALAXIE 500

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: SUNLINER
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1964 FORD COUNTRY SQUIRE

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1958-1959 FORD SKYLINER

    • CC: 5917
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1969 FORD FAIRLANE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1968 FORD CUSTOM 500

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: Y
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1958-1959 FORD SUNLINER

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 223
    • EngineType: L6 ( 3.7 L / 223 )

    1968 FORD GALAXIE 500

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1971-1972 FORD RANCH WAGON

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: P
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1961 FORD THUNDERBIRD

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • EngineType: ALL
    • SubModel: ALL

    1968-1970 FORD CUSTOM 500

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1958-1959 FORD THUNDERBIRD

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • EngineType: ALL
    • SubModel: ALL

    1965 FORD F-100

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1966-1967 FORD COUNTRY SEDAN

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1969 FORD LTD

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1961 FORD GALAXIE

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: SUNLINER
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1966 FORD CUSTOM 500

    • CC: 7014
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 428
    • EngineType: V8 ( 7.0 L / 428 )

    1961 FORD GALAXIE

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: STARLINER
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1969 FORD GALAXIE 500

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1964-1966 FORD CUSTOM 500

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1961 FORD GALAXIE

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: CLUB VICTORIA
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1962-1966 FORD RANCH WAGON

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1963 FORD 300

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1958-1959 FORD RANCH WAGON

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 223
    • EngineType: L6 ( 3.7 L / 223 )

    1958-1959 FORD RANCH WAGON

    • CC: 5441
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 332
    • EngineType: V8 ( 5.4 L / 332 )

    1962 FORD GALAXIE 500

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: VICTORIA
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1968 FORD GALAXIE 500

    • CC: 6997
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: XL
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1958-1959 FORD CUSTOM 300

    • CC: 5441
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 332
    • EngineType: V8 ( 5.4 L / 332 )

    1958-1959 FORD CUSTOM 300

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1969 FORD TORINO

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • EngineType: ALL
    • SubModel: COBRA

    1960-1961 FORD COUNTRY SQUIRE

    • CC: 5769
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 352
    • EngineType: V8 ( 5.8 L / 352 )

    1965-1967 FORD FAIRLANE

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: 500
    • CUI: 427
    • EngineType: V8 ( 7.0 L / 427 )

    1969 FORD GALAXIE 500

    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • SubModel: XL
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )

    1969-1970 FORD F-100

    • CC: 6391
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1970 FORD MUSTANG

    • CC: 7030
    • Fitment_Note: External Balance Weights Are Included In The Hardware Kit~Includes 11 in. & 11.5 in. 3-Finger And 11 in. Diaphragm Clutch Patterns~If Friction Surface Has An 11.75 in. Dia. Use Part #221171~If Friction Surface Has An 11 in. Dia. Use Part #221101
    • Liter: 7.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: J
    • CUI: 429
    • EngineType: V8 ( 7.0 L / 429 )
    Items You Need