FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Ford Racing M-1007-S177A - Ford Racing Wheels

Ford Racing M-1007-S177A - Ford Racing Wheels

Ford Racing#397-M-1007-S177A

Focus SVT Wheel
  • 2000-07 Focus
  • Size: 17" x 7"
  • Bolt Circle: 4 x 108mm
  • Backspacing: 5.94"

    Ford Racing M-1007-S177A - Ford Racing Wheels Details

    Focus

  • 2000-2007 Focus
  • 17" x 7" wide
  • 4-lug, 108mm bolt circle
  • 49mm offset
  • 5.94" backspacing
  • Includes SVT center cap
  • Original equipment on the 2003-2004 SVT Focus
  • Clears M-2300-SVTF5 (300mm) brake kit
  • Non-TPMS Compatible

  • Ford Racing M-1007-S177A - Ford Racing Wheels

    Ford Wheels

    Ford Racing offers wheels that are built to the highest of manufacturing and engineering standards for safety and good looks. Ford Racing gives you a great mix of quality with a resonable cost. There may be cheaper wheels on the market, but you would have a hard time finding safer wheels.

    Ford Racing uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) standards: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrome testing. These standards define a series of tests that ensure a wheel's safety and finish. You usually get what you pay for, don't get wrapped up in a cheap price.

    IMPACT TESTING
    This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13 degree angle to a test fixture by the hub. A weight is dropped from
    9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula using vehicle weight.

    DYNAMIC CORNERING FATIGUE TESTING
    This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A newly-designed wheel runs a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula using vehicle weight.

    DYNAMIC RADIAL FATIGUE TESTING
    This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A newly-designed wheel runs a minimum of 5,000,000 cycles. The load applied is determined by a formula using vehicle weight.

    CHROME QUALITY TESTING
    Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

    Required Lug Nuts
    Acorn/Conical

    Click Here for Wheel Installation Accessories

    Ford Racing 397-M-1007-S177A

    Finish
    Polished
    Wheel Size
    17x7
    Bolt Pattern
    4x108mm
    Back Spacing (in.)
    5.94
    Position
    N/A
    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $8.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69

    Grime Boss M956S8X - Grime Boss Hand Wipes
    Only $14.99