12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Hedman 62230

Stainless Steel Headers Chevy/GMC Truck/SUV SB-Chevy Full Length

Hedman 62230

500-62230

made in usa
jegs shipping
FREE Shipping
Ships 12/19/16 if Ordered Today
$676.99
$651.99
ON SALE - $25.00 OFF
Hedman 62230 Stainless Steel Headers Chevy/GMC Truck/SUV SB-Chevy Full Length $651.99
Stainless Steel Headers
  • Chevy/GMC Truck/SUV SB-Chevy
  • Full Length
  • 1-5/8" Tube Diameter
  • 3" Collector

  • Hedman 62230 Details

    GM Trucks

    1967-91 BLAZER, JIMMY 283-400cid; 4WD
    1967-91 K10 SUBURBAN, K20 SUBURBAN, K15/K1500 SUBURBAN, K25/K2500 SUBURBAN, R10 SUBURBAN, R20 SUBURBAN, R1500 SUBURBAN, R2500 SUBURBAN, V10 SUBURBAN, V20 SUBURBAN, V1500 SUBURBAN, V2500 SUBURBAN 283-400cid; 4WD
    1967-91 K20 PICKUP, K25/K2500, R20, R2500, V20, V2500 283-400cid; 4WD

  • Vehicles equipped with large piston AC compressors require the use of bracket #20110. Sold seperately.
  • Without smog injection or injection heads.
  • Must modify rotary A/C bracket.
  • Early chassis only.
  • Elite replacement gasket #27520.
  • Not legal for sale or use in California on pollution controlled motor vehicles.
  • Some vehicles may encounter clutch shaft interference when cross shaft location is located under or behind the driver's side rear exhaust port. Use #69092 without A.I.R.
  • Use #69093 with A.I.R. Order Elite #69892.
  • This model is recommended for use with lift kits.
  • Not applicable or intended for street or highway use. Legal only for racing vehicles which may never be used upon a highway, check footnotes also.
  • Not legal for sale or use in California.

  • Specifications:

    Tube Size
    1.625
    Collector Tube Size (in.)
    3
    Application
    Automotive
    Engine Make/Size
    Chevy Small Block (262-400)
    Tube Direction
    Down Swept
    Port Shape
    Round
    Material
    Stainless Steel
    Coating/Finish
    304 Stainless Steel
    Manufacturer's Part Number:
    62230

    Hedman Stainless Steel Headers are constructed from 304 stainless steel instead of less expensive 409. 304 stainless steel has more Chromium & Nickel than 409, which provides superior heat and corrosion resistance. Additionally, 304 will not rust or flake like 409 stainless steel. This means Hedman Stainless Steel Headers will retain a cleaner look and endure extreme temperatures better than headers made of 409 stainless steel.

    Hedman Stainless Steel Headers use sturdy laser cut 3/8" flanges, and all primary tubes have smooth-flowing mandrel bends. They're also available with Hedman's HTC Ceramic-Metallic coating for a shiny finish and lower underhood temperatures.

    Does Hedman 62230 fit your vehicle?

    Narrow Results

    1979-1980 GMC K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1979 GMC K2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 CHEVROLET K30 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1977-1978 CHEVROLET K20 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1973 CHEVROLET BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967 GMC K25/K2500 SUBURBAN

    • CC: 4638
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 283
    • EngineType: V8 ( 4.6 L / 283 )

    1972-1973 GMC K1500 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1985 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1984 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1977 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SILVERADO
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1987-1989 CHEVROLET BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET BLAZER

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1969-1971 CHEVROLET K20 PICKUP

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967-1968 CHEVROLET K10 PICKUP

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1968 GMC K25/K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1979-1986 GMC K2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 GMC K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987 GMC V1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1985-1991 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 CHEVROLET K20 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 CHEVROLET K1500 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1968 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1977-1978 GMC K25 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1990 GMC V2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SLE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967 CHEVROLET K20 SUBURBAN

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1981 CHEVROLET BLAZER K5

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET BLAZER

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1971 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1985-1986 CHEVROLET BLAZER K5

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1980 CHEVROLET K10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SILVERADO
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1989-1991 CHEVROLET V3500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC K25 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1981 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • EngineType: ALL
    • SubModel: DELUXE

    1969-1973 GMC K25/K2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1985 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: HIGH SIERRA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1980 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1987-1991 GMC V1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1982 GMC K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 GMC K15/K1500 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1987 CHEVROLET V20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1974 GMC K25/K2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1988-1991 CHEVROLET K1500 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1970-1972 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1987 CHEVROLET V20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 CHEVROLET K3500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972-1973 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1975-1978 GMC K25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1984 CHEVROLET BLAZER K5

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1980 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1968 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1970-1973 GMC K15/K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1987 GMC V2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968-1969 CHEVROLET K10 SUBURBAN

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1986 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1969-1971 CHEVROLET K10 SUBURBAN

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967 CHEVROLET K20 PICKUP

    • CC: 4638
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 283
    • EngineType: V8 ( 4.6 L / 283 )

    1981-1984 CHEVROLET BLAZER K5

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 CHEVROLET K3500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981-1986 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1982-1986 CHEVROLET K10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 CHEVROLET K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1990 CHEVROLET BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973 GMC JIMMY

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1968 GMC K15/K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1969-1974 GMC K25/K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: STREET COUPE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975 CHEVROLET K5 BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969 CHEVROLET K30 PICKUP

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1975-1980 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1987 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1979 GMC K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975 CHEVROLET K5 BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981 CHEVROLET K10 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972-1973 CHEVROLET K10 SUBURBAN

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1982 GMC K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1980 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC K25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1985-1986 CHEVROLET K10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1985 CHEVROLET K20 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1985 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1986 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1983 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC K15 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976-1979 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1979-1980 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1979 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1978 GMC K25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1986 GMC K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET BLAZER K5

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 6.6
    • SubModel: CUSTOM DELUXE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: STREET COUPE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET K20 PICKUP

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1986 CHEVROLET K10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET BLAZER

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1984 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]~This Model Is Recommended For Use With Lift Kits
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )
    Items You Need
    Items You May Also Consider