Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Hellwig 2505

LP-25 Progressive Rate Load Leveler Helper Springs

Hellwig 2505

207-2505

made in usa
jegs shipping
FREE Shipping
Ships from Manufacturer
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Hellwig 2505 LP-25 Progressive Rate Load Leveler Helper Springs $161.75
  • Fits Many Applications
  • 2500 lbs. Capacity
  • 3 Leaf Stack
  • Requires the Use of Spring Install Kit

  • Hellwig 2505 Details

    LP-25 Progressive Rate Load Levelers

  • Mounting Kit Sold Separately
  • Adds New Life To Old Springs
  • Reduces Body Roll
  • Simple Bolt On Installation
  • Variable Rate Leaves Do Not Effect Ride When Unloaded
  • High Quality Spring Steel Leaves
  • Raised Height/Spring Rate Vary On The Adjustment Of Outer Upbolts
  • Limited Lifetime Warranty

  • Specifications:

    Manufacturer's Part Number:
    2505

    The Original Load Levelers

    The Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits set the standard for all other aftermarket helper springs and are the true workhorse of the Hellwig Spring line. Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer's GVWR (Gross Vehicle Weight Rating). Always operate your vehicle safely and never exceed the recommended GVWR, even when using helper springs. They feature a simple "Set it and forget it " bolt-on design using common hand tools, providing both ease of installation and hassle free use. .

    The Hellwig Load Pro Series Helper Spring Kits are available in both Progressive Spring Rate and Constant Spring Rate designs. The Progressive Rate design requires the truck to be loaded and it's spring compressed to activate the helper spring, therefore as the vehicles load increases the helper spring progressively increases its resistance to the load. The Constant Rate design allows the helper spring to immediately react to the vehicles load, therefore compressing very little as load is applied to the vehicle.

    Designed to be installed on full size pick-up trucks and vans, the Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits require mounting hardware to accommodate 2 1/2" or 3" wide leaf springs. When ordering be sure to measure the width of your leaf springs and identify the Load Pro Spring kit to determine the appropriate mounting hardware kit to complete the installation.

    LP-25 Features:
  • Heavy Loads - 3-Leaf Stack
  • 2500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Design can handle the load 24/7
  • Mounting kit sold separately

    LP-35 Features:
  • Heaviest Loads - 4-Leaf and Up Stack
  • 3500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Offers the Maximum in Carrying Capacity
  • Recommended for 3/4 Ton and 1 Ton Applications
  • Mounting kit sold separately

    Note: Please use the "Filter By Vehicle" selection on the left below to find Hellwig Load Pro Series products for your vehicle.

  • Does Hellwig 2505 fit your vehicle?

    Narrow Results

    1969-1971 CHEVROLET C10 PICKUP

    • CC: 5736
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 DODGE D300 PICKUP

    • CC: 3687
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1985-1986 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: BASE
    • EngineType: ALL

    1969 GMC C1500 PICKUP

    • CC: 5736
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET C10 PICKUP

    • CC: 5736
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1988 CHEVROLET R30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.4
    • SubModel: CUSTOM DELUXE
    • CUI: 454
    • EngineType: V8 ( 7.4 L / 454 )

    1981-1982 DODGE D350 PICKUP

    • EngineType: ALL
    • SubModel: BASE

    1969-1971 CHEVROLET C20 PICKUP

    • CC: 5736
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1965-1966 FORD F-250

    • CC: 3933
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 3.9
    • SubModel: BASE
    • CUI: 240
    • EngineType: L6 ( 3.9 L / 240 )

    1972 GMC C1500 PICKUP

    • CC: 5736
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET C20 PICKUP

    • CC: 4801
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1988 CHEVROLET R30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: SILVERADO
    • EngineType: ALL

    1965-1972 FORD F-100

    • CC: 4917
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: BASE
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1979-1980 GMC C3500 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • Liter: 7.4
    • SubModel: BASE
    • CUI: 454
    • EngineType: V8 ( 7.4 L / 454 )

    1974 CHEVROLET C30 PICKUP

    • CC: 4098
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.1
    • SubModel: BASE
    • CUI: 250
    • EngineType: L6 ( 4.1 L / 250 )

    1977 DODGE D150 PICKUP

    • EngineType: ALL
    • SubModel: ALL

    1969-1971 FORD F-250

    • CC: 5900
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1977-1978 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: CUSTOM
    • EngineType: ALL

    1968 GMC C25/C2500 PICKUP

    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1972-1974 DODGE D100 PICKUP

    • CC: 6556
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1967 CHEVROLET C20 PICKUP

    • CC: 4638
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 283
    • EngineType: V8 ( 4.6 L / 283 )

    1972-1974 DODGE D100 PICKUP

    • CC: 5212
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: RANGER LARIAT
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1976 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.4
    • SubModel: RANGER XLT
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1973 CHEVROLET C20 PICKUP

    • CC: 5736
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967-1968 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: ALL
    • EngineType: ALL

    1970-1971 DODGE D100 PICKUP

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: ALL

    1975-1976 DODGE D300 PICKUP

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: CUSTOM

    1969-1971 CHEVROLET C20 PICKUP

    • CC: 5031
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1963-1966 CHEVROLET C10 PICKUP

    • CC: 3769
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 3.8
    • SubModel: BASE
    • CUI: 230
    • EngineType: L6 ( 3.8 L / 230 )

    1968-1972 FORD F-100

    • CC: 5900
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1972 CHEVROLET C10 PICKUP

    • CC: 6588
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 402
    • EngineType: V8 ( 6.6 L / 402 )

    1986 CHEVROLET C30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.2
    • SubModel: CUSTOM
    • CUI: 379
    • EngineType: V8 ( 6.2 L / 379 )

    1973-1980 GMC C35/C3500 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • SubModel: ALL
    • EngineType: ALL

    1973 GMC C25/C2500 PICKUP

    • CC: 4801
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1982-1983 DODGE D150 PICKUP

    • CC: 3687
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1969-1971 CHEVROLET C10 PICKUP

    • CC: 4801
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1978-1979 DODGE D300 PICKUP

    • CC: 5211
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1975-1976 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: CUSTOM
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1975-1976 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: CUSTOM
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1981-1986 GMC C3500 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • SubModel: ALL
    • EngineType: ALL

    1981-1982 DODGE D150 PICKUP

    • CC: 3687
    • Liter: 3.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: E
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1981 DODGE D150 PICKUP

    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1976 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: RANGER XLT
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1974 CHEVROLET C30 PICKUP

    • CC: 7441
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.4
    • SubModel: BASE
    • CUI: 454
    • EngineType: V8 ( 7.4 L / 454 )

    1982 CHEVROLET C30 PICKUP

    • CC: 4786
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1972-1973 DODGE D100 PICKUP

    • CC: 5900
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: RANGER XLT
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1984-1991 DODGE D150 PICKUP

    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1976 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: RANGER XLT
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1976 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1979 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: CUSTOM
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1974 CHEVROLET C30 PICKUP

    • CC: 4801
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1978 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979 DODGE D100 PICKUP

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1968 GMC C25/C2500 PICKUP

    • CC: 5031
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1974 DODGE D200 PICKUP

    • CC: 6556
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1969-1971 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: BASE
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1980-1981 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER XLT
    • EngineType: ALL

    1983 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT
    • EngineType: ALL

    1974 CHEVROLET C30 PICKUP

    • CC: 5737
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 CHEVROLET C10 PICKUP

    • CC: 4097
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.1
    • SubModel: BASE
    • CUI: 250
    • EngineType: L6 ( 4.1 L / 250 )

    1988-1993 DODGE D350 PICKUP

    • EngineType: ALL
    • SubModel: BASE

    1967-1968 GMC C25/C2500 PICKUP

    • CC: 5358
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1968-1972 FORD F-100

    • CC: 6392
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.4
    • SubModel: BASE
    • CUI: 390
    • EngineType: V8 ( 6.4 L / 390 )

    1975-1976 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: NORTHLAND
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1966 CHEVROLET C20 PICKUP

    • CC: 4098
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.1
    • SubModel: BASE
    • CUI: 250
    • EngineType: L6 ( 4.1 L / 250 )

    1986 CHEVROLET C30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978 DODGE D300 PICKUP

    • CC: 3687
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 3.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: B
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1972 CHEVROLET C10 PICKUP

    • CC: 4098
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.1
    • SubModel: BASE
    • CUI: 250
    • EngineType: L6 ( 4.1 L / 250 )

    1979-1980 GMC C3500 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • SubModel: HIGH SIERRA
    • EngineType: ALL

    1980-1981 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER
    • EngineType: ALL

    1969 CHEVROLET C10 PICKUP

    • CC: 6489
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.5
    • SubModel: BASE
    • CUI: 396
    • EngineType: V8 ( 6.5 L / 396 )

    1973-1974 DODGE D100 PICKUP

    • CC: 7212
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1977 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: BASE
    • EngineType: ALL

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: RANGER LARIAT
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1977-1978 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER XLT
    • EngineType: ALL

    1992-1993 DODGE D150 PICKUP

    • CC: 3906
    • Liter: 3.9
    • SubModel: BASE
    • CUI: 239
    • EngineType: V6 ( 3.9 L / 239 )

    1969-1971 CHEVROLET C10 PICKUP

    • CC: 5031
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1988 CHEVROLET R30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.2
    • SubModel: CUSTOM DELUXE
    • CUI: 379
    • EngineType: V8 ( 6.2 L / 379 )

    1972 DODGE D300 PICKUP

    • CC: 7211
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1975-1976 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: NORTHLAND
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1975-1976 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: RANGER
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1966 CHEVROLET C10 PICKUP

    • CC: 4098
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.1
    • SubModel: BASE
    • CUI: 250
    • EngineType: L6 ( 4.1 L / 250 )

    1988 GMC C3500 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • SubModel: ALL
    • EngineType: ALL

    1974 DODGE D200 PICKUP

    • CC: 5900
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1993 DODGE D150 PICKUP

    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: RANGER XLT
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1972 DODGE D300 PICKUP

    • CC: 5900
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1980-1981 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER LARIAT
    • EngineType: ALL

    1979 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: RANGER XLT
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1975-1981 CHEVROLET C30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: CHEYENNE
    • EngineType: ALL

    1974 CHEVROLET C30 PICKUP

    • CC: 4801
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1967 CHEVROLET C20 PICKUP

    • CC: 4801
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1967-1968 CHEVROLET C10 PICKUP

    • CC: 5358
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1988 CHEVROLET R30 PICKUP

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.8
    • SubModel: CUSTOM DELUXE
    • CUI: 292
    • EngineType: L6 ( 4.8 L / 292 )

    1972 DODGE D300 PICKUP

    • CC: 5212
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1985-1986 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT LARIAT
    • EngineType: ALL

    1977 DODGE D300 PICKUP

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: BASE

    1982 DODGE D150 PICKUP

    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )
    2505 - Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits is rated 5.0 out of 5 by 1.
    Rated 5 out of 5 by from Hellwig 2505 I bought this product in hopes of it doing what it said it would do , I am so satisfied with this Load Pro Series and it has done what it said it would do! :)
    Date published: 2016-02-02
    • y_2017, m_9, d_20, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_1925986, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List