Hotchkis 1103C - Hotchkis Tubular Front Control Arms
Hotchkis #515-1103CUpper Control Arms |
||||
|
||||
|
|
||||
Hotchkis 1103C - Hotchkis Tubular Front Control Arms Details
Tubular Upper A-Arms
Hotchkis Tubular A-Arms are designed to adapt the use of taller GM F or B-Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. Disc brakes are easily upgraded with factory 11" or 12" rotors available from F or B Body vehicles. These arms feature Tig welded construction, and greasable polyurethane bushings, upper and lower ball joints, and chromoly offset cross shafts. Note: Arms do not work with factory spindles! Spindles required are 70-76 GM F-Body, or 78+ GM B-Body. Spindles will lower vehicle 3/4" and widen track width 3/8" per side.
Take you cars handling to the next level. Hotchkis tubular control arms are designed to enhance your vehicles handling and control. A-arms are ready to bolt-in with ball-joints, bushings and other hardware already installed. A-arms are 100-percent TIG welded to improve strength and reliability over factory components. Some a-arms will not work with factory spindles so be sure to read ''More Details" to determine what components are required. Made in USA.
