The Rollover Avoidance Device is a precise Digital Inclinometer that features user-programmable maximum safe angles, and a progressive warning tone (like a backup warning). The display shows X (Pitch) and Y (Roll) angles and stores max values, but it's the audio warning that really makes it useful. If you ever go off-road, you'll be surprised and amazed by how useful this meter is.

Features:
Each character display will show a range from 0° up to a maximum of 60° for both X and Y axes'. The unit will have a progressive audio alert indicating the unit is approaching a maximum angle which has been preset by user, and is factory preprogrammed to begin audio alert beep sequence when unit is tilted at angle 14° less than user programmed set point. For example, if user sets 35° as maximum angle then the Rollover Avoidance Device starts beeping at 21°. Beeping becomes progressively faster as final set point is approached according to the following sequence:

• 21° - beeper starts @ 1 second intervals
• 24° - beeper increases rate to 1/2 second intervals
• 27° - beeper increases rate to 1/4 second intervals
• 30° - beeper becomes steady tone

The 14° range will be factory set and whatever final degree set point the user chooses the beep sequence will begin 14 degrees prior and then become a steady tone 5 degrees prior to that point.

In addition to the steady audio alert that begins when the angle is within 5° of the user set point, each display also begins to flash when this same angle point is met for each axis.

Important Disclaimer: This product will in no way intervene and prevent a rollover. It may warn you when you approach extreme or potentially unsafe angles, however, every vehicle is different, as are the terrain, environment and the driver. No device can do more than give a visual and audible warning in regard to angles. Safe driving is up to you, the driver. This device is a tool and a gauge, and it is meant to inform (and entertain) you as you learn about your vehicle.