Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
0
My Cart
$0.00
1-800-345-4545
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
Help

JEGS Performance Products 157313 - JEGS Throttle, TV Cable and Extension Brackets



JEGS Performance Products 157313 - JEGS Throttle, TV Cable and Extension Brackets

JEGS Part Number: 555-157313

Throttle & 700R4 Cable Bracket
  • See 'More info/Details' below for important information
    Fits:
  • Edelbrock Performer, Thunder AVS & All Q-Jet Style Carbs
  • Made in the USA
  • $23.99
    Ships

    JEGS Performance Products 157313 - JEGS Throttle, TV Cable and Extension Brackets Details

    GM Brackets for Edelbrock & Q-Jet Carbs

    • Some low profile intake manifolds may require an intake to carb spacer & studs (sold separately) depending on runner height and shape just behind the carb.
    • For Edelbrock carbs use 720-98A and 555-15841 using the in-board mounting holes.
    • For Q-Jet carbs use 720-86B, 555-15841 and 1/2" Longer Bolts at Front.

    JEGS Throttle Cable Brackets, TV Cable Brackets, and Throttle Lever Extension Brackets simplify the installation of non-OE carbs for use with an OE cable. Precision formed steel to maintain proper geometry and cable travel for smooth throttle operation. Zinc plated for longevity. Available to fit a variety of combinations. Made in the USA.

    157313 - JEGS Throttle, TV Cable and Extension Brackets is rated 4.125 out of 5 by 8.
    • 2016-07-25T08:18CST
    • bvseo_cps, prod_bvrr, vn_cps_3.3.0
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_7
    • loc_en_US, sid_10001_10001_1223818, PRD, sort_relevancy
    • clientName_jegs
    Rated 5 out of 5 by from Just as described solved my problems with 2 bolts. This worked perfect for my 69 C10, 454 with 700r4 trans. Solved my problems with 2 bolts and no wire ties or duct tape. Fit perfect on quadrajet carb!
    Date published: 2016-07-20
    Rated 2 out of 5 by from SOMETHING TO START WITH. BOUGHT THIS BRACKET FOR A EDELBROCK INTAKE CONVERSION WHERE THE STOCK BRAKET WOULD NOT WORK. NEITHER DID THE EDELBROCK BRACKET THAT WAS RECOMMENDED. THIS WAS SUPPOSED TO BE FOR AN EDELBROCK CARB BUT IT TOO DID NOT FIT. I BENDT THE RIGHT SIDE TO BE ABLE TO ATTACH TO MANIFOLD IN BACK OF CARB. WORKED FINE.
    Date published: 2014-12-25
    Rated 5 out of 5 by from Awesome bracket! Gone are the days of fighting with little adjusting screws and 17 brackets to mount, that would inevitably rotate anyway. Its pricy, but exactly what I have been looking for. Money so well spent, I bought a second for my other toy.
    Date published: 2015-09-25
    Rated 3 out of 5 by from Mounting location if you are using a edelbrock carb then this bracket will ONLY mount on the inner holes. If your carb and manifold is set up for the outer carb holes then this bracket will not fit
    Date published: 2016-04-17
    Rated 3 out of 5 by from its ok Had to drill another hole and ream out one of the originals to make is fit Also had to grind some of the bracket to get it to fit in rear left side of edlebrock 1406.
    Date published: 2016-04-22
    Rated 5 out of 5 by from simple. basic Not much to say. It's a very basic bracket. Heavy gauge So is nice and solid and won't bend or flex.
    Date published: 2015-06-14
    Rated 5 out of 5 by from The right parts and fastest shipping ! I can always find the parts I need and know they'll ship faster than anybody else !!
    Date published: 2015-09-13
    • 2016-07-25T08:18CST
    • bvseo_cps, prod_bvrr, vn_cps_3.3.0
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_7
    • loc_en_US, sid_10001_10001_1223818, PRD, sort_relevancy
    • clientName_jegs
    Items You May Also Consider
    Only $26.37

    Ships