FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

JEGS Performance Products 10409 - JEGS Universal 20-Circuit Wiring Harness

JEGS Performance Products 10409 - JEGS Universal 20-Circuit Wiring Harness

JEGS Performance Products#555-10409

Fusible Link
  • For Harness #555-10405
  • 4" Long
  • 3/8" Ring Terminal
  • 2.0 sq/mm (approx. 14 Ga)

    JEGS Performance Products 10409 - JEGS Universal 20-Circuit Wiring Harness Details

    Universal Wiring Harness

    A Fusible Link is used to protect the wire, wiring harness, and other electrical components in your vehicle. When too much amperage is applied to the fusible link wire, it will melt and disconnect power to the wiring harness & fuse panel. This wire is normally connected to the positive battery terminal or large terminal on the starter (main power lead to the fuse panel).

    JEGS Performance Products 10409 - JEGS Universal 20-Circuit Wiring Harness

    Applications: For almost any car or truck with a front-mounted engine and the fuse block under the dash near the steering column. The harness works with the ignition switch mounted on the dash or steering column.

    To simplify installation, all the wires of this updated harness are attached to the fuse block. The "kit" features 20 circuits with 16 fuses in a small fuse block (requires only limited space under the dash). The horn relay, turn signal, and hazard flashers are mounted on the fuse block. All terminals are soldered using premium high-temperature wire for reliability, and the color-coded wires are labeled for easy identification.

      Wiring for:
    • Horn
    • Radio
    • Power Windows
    • Power Door Locks
    • Lights (Headlights, Taillights, Parking Lights, Dome Light, Brake Lights, 3rd Brake Light, Gauge Lights, Backup Lights, and License Plate Light)
    • Turn Signals, Hazard Lights, and High-Beam Indicators
    • Windshield Wipers
    • A/C and Heater
    • Charging System
    • Ignition System/Coil/Starter
    • Neutral Safety Switch
    • Gauges (Fuel Level, Oil Pressure, Speedometer, Tachometer, Voltmeter, and Water Temperature)
    • Electric Cooling Fan
    • Electric Fuel Pump
    • Cigarette Lighter
    This wiring harness kit also has optional connectors for common GM-style accessories, such as dimmer switch, hazards, and alternator. For vehicles that don't use GM accessories, simply omit the extra connectors during installation. The wiring instructions show how to make all connections for GM, Ford, and Chrysler vehicles.
      Kit includes:
    • Prewired Fuse Block with Fuses
    • Color-Coded and Labeled Wire
    • Horn Relay
    • Turn Signal and Hazard Flashers
    • Prewired Headlight Connectors
    • Two GM Ignition Switch Connectors
    • GM Alternator Connector
    • GM High-Beam Switch Connector
    • Fusible Link
    • Firewall Grommet
    • Cable Ties
    • Crimp Terminals
    Made in the USA

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $8.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69

    Grime Boss M956S8X - Grime Boss Hand Wipes
    Only $14.99