12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

JEGS Performance Products 52085

Universal Radiator Mount For 31"x 19" Radiators

JEGS Performance Products 52085

555-52085

made in usa
jegs shipping
FREE Shipping
Ships
JEGS Performance Products 52085 Universal Radiator Mount For 31"x 19" Radiators $103.99
Universal Radiator Mount
  • For 31"x 19" Radiators
  • Made in the USA

  • Specifications:

    Bracket Finish
    Natural
    Bracket Material
    Aluminum

    JEGS Universal Radiator Mounting System is designed to securely hold your JEGS Universal Aluminum Radiator in place. They will also work with other radiators that have the same overall dimensions and a 3" to 3-1/2" thick tank ridge or they can be modified to fit most any other radiator. The unique design features horizontal bars and vertical tubes that make the assembly rigid. Extruded aluminum core supports with urethane mounting pads hold the radiator tightly in place. It offers you unlimited mounting options to your vehicle. Unlike other universal mounts it bolts together with the included stainless steel hardware. There is no welding required however some assembly and fabrication skills may be needed. Made in the USA.

    52085 - JEGS Universal Radiator Mounting System is rated 3.0 out of 5 by 1.
    • y_2016, m_12, d_9, h_13
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_944513, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Rated 3 out of 5 by from Fairly good mount this mount is decent..... i was not satisfied with the clearance between inlet and outlet of the radiator and the crow's foot that actually clamps/ grips the radiator. the clearance was such that there was not enough room to install even a silicone hose withput certian failure due to rubbing..... this forced me to cut down the aluminum round stock wich locates the two clamps, and drill and tap new bilt holes. thus narrowing the the clamps. also the crows feet that actually grip the radiator appear to be made for a 3 row radiator, and non adjustable. this would be fine except i got the biggest 3 pass aluminum side flow radiator i could get, wich was a BeCool 31"x19" 2 row (and i still would like a bigger one, say 36"x24" 3 row)... thus making the crow's feet about an inch to big to correctly grip/clamp the radiator. ...... that being said i knew i would be making modifications to this mount when i ordered it. i am a welder by trade and this mount is a good base to start with for my application. in my opinion the round stock in the kit should shortened up so that the crows feet are not so tight up against the inlet and outlet of the radiator (i shortened mine up to 15 29/32", wich fit another set of notches in the radiator i ordered), and the radiator needs to be a 3 row to properly fir the non adjustable crow's feet..... overall though, the quality of the aluminum is good, and the kit is a simple fix for many mounting scenarios/applications.... in the future if there was a kit with a selectable/adjustable width section and an adjustable crow's foot/clamp i would go with that, however, if such a kit was not available i would purchase this one again .
    Date published: 2015-09-16
    • y_2016, m_12, d_9, h_13
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_944513, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Items You May Also Consider