JEGS Performance Products#555-80064Engine Cradle with Wheels
Need an Engine Stand for Your Next Project?
This One Will Get You Rollin'
JEGS EZ Kits are designed by JEGS professionals to ensure that you get all the correct parts you need.
Rated 3 out of 5 by Oldschoolrodes24 from Meh I bought 2 of these for customer engines. The first went together flawlessly. Seemed a little wobbly but once installed on the block its sturdy as a rock. No complaints there. Customers motor made the 150 mile trip home with no issues. The second the customer stopped me at a short block and just took his motor so I said sweet I get a cradle for myself. Went to put it together and the lower bolt holes (which are drilled with nuts welded behind) were off center. I had to massage both openings and one bolt ended up snapping in the process of tightening it down. But again once bolted to the block it seems just fine. I am travelling 1200 miles with this block so we'll see how it does but I am confident.
Date published: 2015-08-25
Rated 4 out of 5 by mechanicalman from Pleased I had a couple engines I needed to be able to store and move with ease, this product allowed me to do that at a reasonable price. I do wish, however, that the wheels not be bolted to the axles when shipped as they have to come apart to assemble the frame. I was unable to read the last two questions on this review so I was forced to give them both 3's, if able to read maybe I could have rated that higher. I will not be forced to watch a video just to get those questions. I'm getting turned off by this now.
Date published: 2015-02-14
Rated 2 out of 5 by JoeM55 from Engine cradle - Hard to use I bought this a few weeks ago and was a little disappointed. This was the 1st product I received from Jegs that was not a quality product. The cradle was for a Small Block Chevy, but you have to pull the back portion while someone holds the engine to get it to fit on the bellhousing side. It is too far apart to fit just right. As you bolt on 1 side, it is about 2 inches wider than the back of the engine. So you have to pull it inward to bolt on the opposite side. Takes 2 people or a come-a-long.
Date published: 2014-11-02
Rated 5 out of 5 by Hodge from Good Quality The quality for the price is really great. Easy to put together, very nice powder coat finish. The wheels are very strong and easy to roll around even with a BB sitting on it.
Date published: 2015-08-31
Rated 3 out of 5 by Joshb187 from Holds an engine. After you pry, bend, push, and pull to get this thing lined up and assembled be prepared to loosen every fastener again to get it bolted up to an engine. Then after that don't expect all 4 casters to touch the ground at the same time. It does hold my engine. It is easier to move it around rather than picking the engine up.
Date published: 2015-07-03
Rated 5 out of 5 by Greeninwood from These are perfect. I was worried they would not roll on unsmooth concrete but they do without any problem. I did have to spring the rear sides inward to get the bolts attached but did so without any modification. Would definitely purchase another. Great product and excellent price.
Date published: 2014-11-02
Rated 5 out of 5 by BR549 from Great! At $34.00 and free shipping, this thing is a bargain for it's intended use. All but one hole lined up easily, it's more than adequate to support my 327 and it rolls like a dream when loaded. It's everything I needed it for.
Date published: 2014-12-26
Rated 5 out of 5 by lil russ from rolls good and its strong i bought this to make a run stand for my 1975 454 big block to break it in after i installed a new cam, worked perfect. when all my buddys come over i can fire up my motor and make some noise. good price and quality.
Date published: 2014-12-18
Items You May Also Consider