MSD Ignition 8920 - MSD Tach Adapter - Points or Amplifier and Magnetic Pickup

MSD Ignition #121-8920

Tach/Fuel Adapter, Magnetic Pickup
Magnetic Trigger Installations or Current Triggered Tachometers

Installation Instructions for MSD Ignition 8920 - MSD Tach Adapter - Points or Amplifier and Magnetic Pickup

Complete list of MSD Tach Adapter - Points or Amplifier and Magnetic Pickup

Overview
Similar Items

Tach/Fuel Adapter, Points and Amplifier
(Factory Ignition Module)
If you are triggering an MSD Blaster, 5,6, or 7 Series Ignition with its white wire or points terminal, you will need this Tach Adpater. This unit will correct the operation of most voltage triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

Magnetic Pickup
If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need the #121-8920 Tach Adapter. This will correct the operation of most voltage triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current triggered tachs (hooked in series with the ignition switch).

Mallory 29078 - Mallory Tach and Tach/Fuel Adapters

Only $132.99

Ships

High Performance Auto Parts

Over 50 years of experience delivering the best in High Performance Auto parts. JEGS has the knowledge and technical support staff along with 100% satisfaction guarantee. Our warehouse is filled with millions of name brand parts ready for same day shipping.

What You Want - When You Want It - At the Price You Want to Pay

JEGS Online

	Tach/Fuel Adapter, Points and Amplifier (Factory Ignition Module) If you are triggering an MSD Blaster, 5,6, or 7 Series Ignition with its white wire or points terminal, you will need this Tach Adpater. This unit will correct the operation of most voltage triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

	Magnetic Pickup If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need the #121-8920 Tach Adapter. This will correct the operation of most voltage triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current triggered tachs (hooked in series with the ignition switch).