Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

MSD Ignition 62152 - MSD Ignition DIS Ignition Controls

MSD Ignition 62152 - MSD Ignition DIS Ignition Controls
MSD Ignition 62152 - MSD Ignition DIS Ignition Controls

JEGS Part Number: 121-62152

DIS-4 Plus 4-Channel Ignition Control
  • 6 or 8-Cylinder Engine with 2, 3 or 4-Coil Packs
  • CARB E.O Number D-40-31
    • Fits Applications:
    • 1984-2007
    • Click to see All

    MSD Ignition 62152 Details

    DIS Plus Ignition Controls

    MSD DIS-4 - 4-Channel Ignition

  • For use on 6 or 8-cylinder engines with two, three or four coil packs
  • 50 State Legal
  • Non-OBD II Approved via Carb E.O. D-40-31

    Operating Specifications
  • Spark Energy: 105-115 mJ per spark
  • Primary Voltage: 460-480 volts
  • Secondary Voltage: 40,000 volts
  • Spark Series Duration: 20° crankshaft rotation
  • RPM Range: 14,000 RPM with 14.4 volts
  • Voltage Required: 10-18 volt (Negative Ground)
  • Current Draw: 6.6 amp per 10,000 RPM
  • Size: 9.5" L x 4.5" W x 2.2" H
  • Weight: 4.5 lbs

    Fits Applications Revisions:
  • Plymouth Grand Voyager Base 1990-00
  • Plymouth Voyager Base 1991-00

  • MSD Ignition DIS Ignition Controls

    Maximize your vehicle's distributorless ignition system with MSD's powerful ignition controls; the MSD DIS-2 and DIS-4. These Ignition Controls feature Multi-Channel capability, and can deliver up to 480 volts to the primary side of most DIS type dual output coils. Using channels, the MSD Digital DIS-2 is designed for all 4-cylinder applications using 2 coils, while the DIS-4 can be used on all 6 and 8-cylinder engines with three or four coils.

    DIS Ignitions feature the race proven capacitive discharge, multiple spark design of the MSD 6 Series Ignitions. Each spark of the MSD Digital DIS Ignitions is packed with up to 115 millijoules of spark energy, resulting in more efficient combustion to produce more power. To improve low speed throttle response, smooth out the idle and stop low speed spark plug fouling our engineers included MSD's proven multiple spark discharge feature. This race tested design produces a series of full power sparks that last for 20° of crankshaft rotation to ensure complete combustion of the fuel mixture!

    The MSD DIS Ignition Controls are an incredible breakthrough for late model Mustangs, Grand Nationals, Talons, Mitsubishi GT 3000s and a list of other DIS Ignition equipped vehicles. With the proven MSD Ignition high speed RISC microcontroller technology and years of performance ignition experience, the MSD DIS Ignition Controls will make a great addition to your car!

    Soft Touch REV Control - The DIS-2 and DIS-4 feature an adjustable built-in Soft Touch Rev Control to protect the engine from overrev damage caused by missed shifts or broken driveline components. This feature produces a smooth rev-limiting action by randomly dropping one cylinder at a time and then refiring that cylinder on the next firing cycle. This feature is easily adjusted with simple program switches mounted on the side of the unit.

    Two Step Module Selector - The Two Step function of the MSD Digital DIS Ignition allows you to activate a low RPM limit while staging and waiting for the light to turn green. This popular feature gives you a distinct advantage over your competition by permitting you to control your engine's RPM precisely before every launch. With a fixed RPM limit at the starting line, each launch will be consistent and quick! The RPM limit is easy to adjust in 250 RPM increments with switches built into the side of the housing.

    Programmable Timing Control - Precise timing control is essential to producing maximum engine power. With the addition of nitrous, turbos or supercharger systems, timing becomes even more critical. To get the most out of your engine, the ignition must be able to compensate for these extreme changes in cylinder pressure throughout the engine's entire RPM range. During low speed operation, the MSD DIS Ignitions use the factory ignition to control basic timing functions. Once maximum timing is achieved, the DIS-2 and DIS-4 can be programmed to retard the timing at a specific rate and RPM point to prevent engine damage due to detonation caused by excessive timing.

    LED Monitor - Built-in LED monitor is a useful tool to determine the status of the charging and ignition systems. When the battery voltage drops below 8 volts, the LED will begin flashing at a rate of two times per second, letting you know that the charging system is not operating properly or that the battery has failed. Also, if any of the ignition's channels lose their trigger input, the LED will flash at a rate of one flash per second.

    Ignition Interrupt - To prevent accidental or unauthorized starting of the vehicle, the MSD DIS Ignition systems feature a driver activated ignition interrupt feature that can be used as an anti-theft device. When activated, this feature will prevent the engine from starting.

    Items similar to MSD Ignition 62152

    MSD Ignition 62152

    Height (in.)
    Width (in.)
    Length (in.)
    CD Voltage Output to Coil
    470 V
    Coil Included
    Current Draw
    6.6 amps at 10,000 rpm
    Data Acquisition
    Ignition Box Color
    Ignition Box Output
    Capacitive discharge
    Maximum Operating Voltage
    18 V
    Minimum Operating Voltage
    12 V
    Sold individually
    Rev Limiter
    Spark Output (millijoules)
    105-115 Millijoules
    Timing Retard
    Manufacturer's Part Number:
    Items You May Also Consider
    Only $434.95

    MSD Ignition 88812 - MSD DIS-2 & DIS-4 Harnesses
    Only $54.01

    MSD Ignition 88813 - MSD DIS-2 & DIS-4 Harnesses
    Only $101.95

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $4.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $2.69