FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

MSD Ignition 7720 - MSD Power Grid Ignition System

MSD Ignition 7720 - MSD Power Grid Ignition System

MSD Ignition#121-7720

Power Grid Ignition Control Box
  • Each
    MSD® Rebate
    Expires on August 31, 2014

    Buy any MSD product and get up to $50 in rebates! More Info

    View All MSD Products

    MSD Ignition 7720 - MSD Power Grid Ignition System Details

    Power Grid Ignition Control Box

    Mounting Template

    Operating Specifications
  • Spark Energy: 200-220 mJ per spark
  • Primary Voltage: 545-570 volts
  • Secondary Voltage: 50,000 volts
  • Spark Series Duration: 20° crankshaft rotation
  • RPM Range: 15,000 RPM with 14.4 volts
  • Voltage Required: 12-18 volt (Negative Ground)
  • Current Draw: 1.3 amp per 1,000 RPM
  • Size: 7.5" L x 5" W x 2.25" H
  • Weight: 2.9 lbs

  • MSD Ignition 7720 - MSD Power Grid Ignition System

    The Power Grid Ignition System is the next evolution of the Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing.

    The Power Grid Ignition incorporates CAN-BUS technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-BUS is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products.

    NOTE: To use any modules with the Power Grid System, users MUST plug the modules into a 4-Connector CAN-BUS Hub (# 121-7740) to be attached to the Power Grid System Controller (# 121-7730).

    The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid Ignition Control box. Also, this new Ignition packs higher output than current programmable units!

    The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The Power Grid Ignition Control Box, available separately, is supplied with the harness and mounting hardware.

    Powergrid System Flyer

    Features
  • USB connection for ease of programming
  • Timing based on engine RPM and gear value
  • Advanced individual cylinder timing based on gear or time
  • Five retard stages for nitrous
  • Four steps of RPM limits for burnouts, spool, launch and over rev
  • Direct connection to Racepack
  • Output switch set on RPM, pressure, or time
  • Shift light settings for each gear
  • Ignition data acquisition accepts multiple runs

    JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.

  • MSD Ignition 121-7720

    RPM
    OEM
    JEGS Performance Products 40680 - JEGS Electronics Mounting Plate
    Only $48.99

    JEGS Performance Products 28020 - JEGS Dielectric Grease
    Only $5.99

    MSD Ignition 7761 - MSD Power Grid Ignition System
    Only $523.95

    MSD Ignition 7751 - MSD Power Grid Ignition System
    Only $167.95


    See All Items You Need