Jegs Free Catalog
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Category
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Magnaflow 94014

Pre OBD-II Universal Catalytic Converter Body Shape: Oval, Center/Center

Magnaflow 94014

642-94014

jegs shipping
Ships from Manufacturer
Magnaflow 94014 Pre OBD-II Universal Catalytic Converter Body Shape: Oval, Center/Center $79.35
Pre OBD-II Universal Catalytic Converter
  • Body Shape: Oval, Center/Center
  • Inlet/Outlet: 2"
  • Width: 6.5"
  • Body Length: 12"
  • Overall Length: 16"
  • Single Air Tube

  • Specifications:

    Body Length (in.)
    16
    Overall Length (in.)
    16
    Inlet Size (in.)
    2
    Outlet Size (in.)
    2
    Material
    Stainless Steel
    Emission
    Non-California (49-State)
    Core Substrate Material
    Ceramic
    Outlet Quantity
    1
    California Air Board Approved
    No
    Converter Body Size
    5.5 in. O.D.
    Universal Or Specific Fit
    Universal
    Main Piping Diameter (in.)
    2
    Catalytic Converter Format
    Pre-Catalytic Converter and Main Catalytic Converter
    Oxygen Sensor Location
    N/A
    CAT Converter Air Tube Adapter
    Air Tube Pre-Installed
    Core Shape
    Oval
    CARB Compliant
    No
    CAT Converter Configuration
    Universal
    AIR Tube
    Yes
    Body Size
    OEM
    California Legal
    No
    Converter Overall Thickness (in.)
    4
    Converter Overall Width (in.)
    6.5
    Converter Style
    3-way with oxidation
    GVW (lbs.)
    6,000
    Heat Shield
    Yes
    Inlet Attachment
    Slip fit
    Outlet Attachment
    Slip fit
    Quantity
    Sold individually
    Substrate Material
    Ceramic honeycomb
    Substrate Material
    OEM
    Outlet Quantity
    One
    Case Material
    Stainless steel
    Inlet Diameter (in.)
    2
    Outlet Diameter (in.)
    2
    Inlet Quantity
    One
    Manufacturer's Part Number:
    94014

    For engines built before 1996, these catalytic converters have stainless steel ribbed bodies that minimize expansion/distortion when the converter heats up. The ribs form a channel that protects pads from direct exposure to exhaust gas, plus they keep the ceramic catalyst aligned. Rigid OE-type heat shields add structural stability, and strong 1/2" lap-joints fuse necks to the body (for best flow, necks don't extend into bodies). .


    Choosing the Correct Catalytic Converter
    1.
    Determine engine size and vehicle weight (there are legal limit regulations).

    2. Determine the type of catalytic converter being replaced:
  • Pre OBD-II converters are for vehicles built before 1996.
  • OBD-II converters must be used on vehicles built in 1996-Up.

    3. If the engine has been changed and is not the same model year as the chassis, proceed as follows:
  • For engines older than the chassis, select the converter based on the chassis model year.
  • For engines newer than the chassis, select the converter according to the engine requirement.

    4. It is necessary to know which type of catalytic converter was originally used on the vehicle: 2-Way, 3-Way, or 3-Way + Air. Required by the EPA, this information (abbreviations listed below) is on the vehicle emission control label in the engine compartment. The label should be visible on the firewall, hood's underside, radiator support, fan shroud, or shock tower.
  • 2-Way (Oxidation) = OC or COC
  • 3-Way (Oxidation Reduction) = TWC or ORC
  • 3-Way + Air (3-Way plus Oxidation) = TWC/OC or ORC/OC


    Note: 49-State Catalytic Converters are not legal for sale, installation, or use on licensed vehicles in the state of California.

  • Does Magnaflow 94014 fit your vehicle?

    Narrow Results
    Filter By
    Year
    Filter By
    Make
    Filter By
    Model
    Filter By
    SubModel
    Filter By
    EngineType
    Filter By
    CC
    Filter By
    Liter
    Filter By
    Aspiration

    1982-1983 CHEVROLET CAMARO

    • CC: 2474
    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: SPORT
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1984 AMERICAN MOTORS EAGLE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: LIMITED
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1977-1979 BMW 320I

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1982 VOLKSWAGEN RABBIT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    1987-1989 PLYMOUTH EXPO

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1986 FORD LTD

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 5.8
    • SubModel: CROWN VICTORIA
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1983 MAZDA RX-7

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LIMITED EDITION

    1983-1985 HYUNDAI PONY

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: L

    1986 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: CRUISER

    1981 JEEP CHEROKEE (SJ)

    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: CHIEF
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1983-1985 MERCURY GRAND MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LS

    1986 DODGE ARIES

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.2
    • SubModel: LE
    • CUI: 135
    • EngineType: L4 ( 2.2 L / 135 )

    1983-1986 PLYMOUTH TURISMO 2.2

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1982-1985 BUICK CENTURY

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 3.0
    • SubModel: CUSTOM
    • CUI: 181
    • EngineType: V6 ( 3.0 L / 181 )

    1982-1983 OLDSMOBILE CUTLASS CIERA

    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.0
    • SubModel: BASE
    • CUI: 181
    • EngineType: V6 ( 3.0 L / 181 )

    1990 TOYOTA TERCEL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: STD

    1983 VOLKSWAGEN RABBIT

    • CC: 1715
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.7
    • SubModel: GL
    • EngineType: L4 ( 1.7 L / 1715 CC )

    1985 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: GT
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1984 PLYMOUTH HORIZON

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: TURISMO 2.2

    1986 PEUGEOT 505

    • CC: 1971
    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: STI
    • EngineType: L4 ( 2.0 L / 1971 CC )

    1981-1985 MAZDA RX-7

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: GS

    1986 OLDSMOBILE CUTLASS CIERA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: S
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1983 OLDSMOBILE FIRENZA

    • Fitment_Note: w/Air Tube~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: CRUISER S

    1983-1984 CHRYSLER LEBARON

    • CC: 2213
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.2
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: C
    • CUI: 135
    • EngineType: L4 ( 2.2 L / 135 )

    1983 DODGE DIPLOMAT

    • CC: 3687
    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: MEDALLION
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1989 TOYOTA COROLLA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    1984 DODGE MINI RAM

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ROYAL

    1987-1988 FORD RANGER

    • CC: 1989
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: XLT
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1983 OLDSMOBILE FIRENZA

    • Fitment_Note: w/Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: BASE
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1990-1992 DODGE SPIRIT

    • CC: 2507
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: LE
    • CUI: 153
    • EngineType: L4 ( 2.5 L / 153 )

    1982 VOLKSWAGEN RABBIT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: S

    1982-1983 JEEP WAGONEER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: BROUGHAM
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1984-1985 OLDSMOBILE CUTLASS CIERA

    • CC: 3800
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.8
    • SubModel: BROUGHAM
    • CUI: 231
    • EngineType: V6 ( 3.8 L / 231 )

    1982 BUICK SKYLARK

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: BASE
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1982-1983 JEEP CJ5

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: LAREDO
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1982 CHEVROLET CITATION

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: X-11
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1985-1987 CHRYSLER LEBARON

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: GTS

    1982-1984 VOLKSWAGEN RABBIT

    • CC: 1715
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.7
    • SubModel: L
    • EngineType: L4 ( 1.7 L / 1715 CC )

    1989-1990 JEEP WRANGLER (YJ)

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: ISLANDER
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1986 MAZDA RX-7

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: GXL

    1983 PONTIAC FIREBIRD

    • CC: 2474
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: BASE
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1985 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: GT
    • CUI: 112
    • EngineType: L4 ( 1.8 L / 112 )

    1990 TOYOTA TERCEL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    1987 CHRYSLER LEBARON

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: PREMIUM

    1982-1983 VOLKSWAGEN RABBIT

    • CC: 1715
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.7
    • SubModel: LS
    • EngineType: L4 ( 1.7 L / 1715 CC )

    1993 DODGE SHADOW

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.2
    • SubModel: HIGH LINE
    • CUI: 135
    • EngineType: L4 ( 2.2 L / 135 )

    1982-1983 JEEP CJ5

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: BASE
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1981-1985 MERCURY GRAND MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    1982-1983 JEEP CJ7

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: LIMITED
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1985 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: BROUGHAM SX
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1980 CHRYSLER LEBARON

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: SPECIAL
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1980-1981 DODGE OMNI

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1984 BUICK SKYHAWK

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: CUSTOM
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1983 AMERICAN MOTORS EAGLE

    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: SX4
    • CUI: 150
    • EngineType: L4 ( 2.5 L / 150 )

    1982-1983 JEEP CHEROKEE (SJ)

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: BASE
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1985-1988 CHEVROLET NOVA

    • CC: 1588
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: BASE
    • CUI: 98
    • EngineType: L4 ( 1.6 L / 98 )

    1982 DODGE OMNI

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: 024 MISER

    1985-1986 PLYMOUTH HORIZON

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1989 DODGE DAYTONA

    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ES

    1987 NISSAN SENTRA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: SE

    1982 PONTIAC FIREBIRD

    • CC: 2474
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: BASE
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1988 CHEVROLET NOVA

    • CC: 1588
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: TWIN CAM
    • CUI: 98
    • EngineType: L4 ( 1.6 L / 98 )

    1988-1989 CHRYSLER LEBARON

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1982 MERCURY MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: BROUGHAM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983-1985 BUICK CENTURY

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: CUSTOM
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1982 DODGE OMNI

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: E-TYPE

    1983-1984 CHRYSLER E CLASS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.2
    • SubModel: BASE
    • CUI: 135
    • EngineType: L4 ( 2.2 L / 135 )

    1985 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: ES
    • CUI: 112
    • EngineType: L4 ( 1.8 L / 112 )

    1988 DODGE DAKOTA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.2
    • SubModel: SPORT
    • CUI: 135
    • EngineType: L4 ( 2.2 L / 135 )

    1981 JEEP WAGONEER

    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LIMITED

    1983-1985 BUICK CENTURY

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: T-TYPE

    1982-1985 BUICK SKYLARK

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: LIMITED
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1986 MERCURY GRAND MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.8
    • SubModel: LS
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1983-1985 TOYOTA TERCEL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980-1983 PEUGEOT 504

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1985 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BROUGHAM LX
    • CUI: 112
    • EngineType: L4 ( 1.8 L / 112 )

    1981-1985 CHEVROLET CHEVETTE

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: BASE
    • CUI: 98
    • EngineType: L4 ( 1.6 L / 98 )

    1986 PONTIAC 6000

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: SE

    1989-1992 CHRYSLER DAYTONA

    • CC: 2507
    • Fitment_Note: w/Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: BASE
    • CUI: 153
    • EngineType: L4 ( 2.5 L / 153 )

    1986 OLDSMOBILE FIRENZA

    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LX

    1983 PLYMOUTH CARAVELLE

    • CC: 3687
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1980 MERCURY MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.8
    • SubModel: BROUGHAM
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1986 PEUGEOT 505

    • CC: 1971
    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: S
    • EngineType: L4 ( 2.0 L / 1971 CC )

    1991-1992 CHRYSLER LEBARON

    • CC: 2507
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • Aspiration: T
    • SubModel: BASE
    • Engine Vin: J
    • CUI: 153
    • EngineType: L4 ( 2.5 L / 153 )

    1984 DODGE CHARGER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1982 PONTIAC PHOENIX

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: LJ
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1984-1986 JEEP CJ7

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1986 FORD LTD

    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 5.8
    • SubModel: CROWN VICTORIA LX
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1982-1983 OLDSMOBILE CUTLASS CIERA

    • CC: 2474
    • Fitment_Note: w/o Air Tube~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: LS
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1980 CHRYSLER LEBARON

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: SALON
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1980-1982 CHRYSLER CORDOBA

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1983-1984 FORD RANGER

    • CC: 1989
    • Fitment_Note: Except High Altitude~Split Date From 8/82~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: XLT
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1985 FORD RANGER

    • CC: 1989
    • Fitment_Note: Split Date From 8/82~Cutting And Welding Required During Installation
    • Liter: 2.0
    • SubModel: XL
    • CUI: 122
    • EngineType: L4 ( 2.0 L / 122 )

    1987 NISSAN SENTRA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: E

    1983 DODGE MIRADA

    • CC: 3687
    • Fitment_Note: w/Air Tube
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1982-1983 JEEP SCRAMBLER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: SR
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1986 HYUNDAI PONY

    • CC: 1393
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 1.4
    • SubModel: L
    • CUI: 85
    • EngineType: L4 ( 1.4 L / 85 )

    1983 DODGE DIPLOMAT

    • CC: 3687
    • Fitment_Note: w/Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: SALON
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1982-1983 OLDSMOBILE FIRENZA

    • Fitment_Note: w/Air Tube~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LX

    1982-1984 OLDSMOBILE OMEGA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: ES
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )
    Items You Need