0
0
×
Account Login
1-800-345-4545
Gift Cards
Track Order
Help Center

McLeod Clutch Fork Pivot Ball Stud GM V8

673-16908


Product Q&A
View Now
Click image to zoom
Clutch Fork Pivot Ball Stud GM V8
$44.00
5 left in stock
Clutch Fork Pivot Ball Stud
  • 1955-1983 GM V8
  • Adjustable Ball Stud
  • 13/16" Thread
  • Ships
    QTY
    16908 is rated 3.3 out of 5 by 3.
    Rated 4 out of 5 by from quality part, but requires re-threading to fit The adjustable ball stud is a very high quality strength part. The pivot ball fit nicely into the fork. I would have been dead in the water without this unique part, for my 85 vette with third party bell/block plate) But two Problems... You will need to buy a 13/16" tap/die to re-thread part, before it will fit into the bellhousing. (verified with two studs and two bellhousings). The ball tip will NOT fit through the hole in bellhousing, so cant be inserted whole assemply from behind, unless you grind away a bit of the ball's circumference edge. Will need a 3/4" to 1" wide screwdriver blade, (I found a like tool at harborfreight) to screw in the stud. Best to install before mounting bellhouse, because inner bolt to long to fit in from the front (because clutch plate) once bellhouse mounted. Unless you stick inner bolt through hole, and then after install outer peice from behind. But then cant use screw driver on outer peice until after the inner bolt is cut off.
    Date published: 2017-11-27
    Rated 1 out of 5 by from Will Not Fit Quick Time Bellhousing I bought this Adjustable Stud to solve my problems on my QuickTime Bellhousing where the stud suppiled was to short. It says in the ad that it is 13/16" threads. The threads on the McLeod piece is not cut to the same depth as the QuickTime stud. It will not screw in without it jamming up.
    Date published: 2020-02-27
    • y_2024, m_3, d_28, h_10
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_2
    • loc_en_US, sid_10001_10001_653248, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Related Products

    AMD R-207 Master Clutch Linkage Kit Includes:(1) Upper push rod(1) Upper push rod boot(3) Rod clips(1) Frame side bracket(1) Block side stud with seal(1) Frame side ball stud with nut and washer(2) Bellcrank felts (only one required)(1) Lower adjustable rod(1) ...
    Close
    Auto Metal Direct (AMD) R-206 Master Clutch Kit Includes:(1) Upper push rod(1) Upper rod boot(3) Rod clips(1) Frame side bracket(1) Block side stud with seal(2) Bellcrank felts (only one required)(1) Lower adjustable rod(1) Return spring(1) Clutch fork to bellhousing rubber ...
    Close
    Breakdown of Included ItemsThis Auto Metal Direct clutch linkage kit is an ideal replacement or upgrade for your 1971-1982 big or small-block Camaro.Auto Metal Direct W-323 Clutch Linkage Kit Features:Complete with correct components from the left pedal to the clutch ...
    Close

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.