Free Shipping on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
Shop By Vehicle
Shop By
All Categories

Gift Certificates
My Account
E-Mail Signup
Catalog Request

Meziere WP116BHD

100 Series Remote Mount Bulkhead Electric Water Pump 42 gpm

Meziere WP116BHD

Part Number: 680-WP116BHD

100 Series Remote Mount Bulkhead Electric Water Pump
  • 42 gpm
  • Heavy-Duty Motor
  • Anodized Blue
  • $325.72
    Ships 11/07/16
    if Ordered Today
    FREE Shipping
    Meziere WP116BHD 100 Series Remote Mount Bulkhead Electric Water Pump 42 gpm $325.72

    Meziere WP116BHD Details

    100 Series

  • 42 GPM Free-Flow Rating
  • Features:
  • Remote mount bulkhead design for universal fit
  • Suitable for street or drag strip use - 3000+ hour life expectancy
  • Show quality finish
  • Heavy Duty motor provides 42 gallons per minute free flow rating
  • Stainless steel hardware and 4130 mounting bracket included
  • Single inlet port threaded 1'' NPT to accept our standard inlet fittings
  • Dual outlet ports threaded #12AN for a wide variety of line connection options
  • Dual outlet ports provide tandem outlet lines perfect for V6, V8 or V10 applications
  • Light weight. Complete standard unit weighs only 5.5 pounds!
  • Stainless steel large diameter main shaft with high performance ceramic seal
  • 1'' NPT inlet adapters available for -12AN, -16AN, -20AN, 1-1/4'', 1-1/2'' or 1-3/4'' slip hose
  • -12AN o-ring style outlet fittings available for -10AN, -12AN, -16AN, 5/8'', 3/4'', 1'', or 1-1/4'' slip hose.

    Technical Specifications:
  • Finishing The System: This pump is supplied complete with hardware but without the inlet and outlet fittings. The fittings need to be ordered according to the type and size of the desired hose connections.
  • Amperage draw: Under normal use the pump will draw 6-7 amps.
  • Overall Height Dimension: The standard pump is 5.00'' long from the mounting surface to the tip of the pump. The heavy duty pump is 5.50'' long from the mounting surface to the tip of the pump.
  • Pump Weight: This application weighs 5.5 lbs.
  • Care should be taken that the pump not be run while charging.

    Additional Notes: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard.

  • Specifications:

    Amp Draw
    8.00 amps
    Flow Rate @ 12 Volts (gpm)
    42 GPM
    Hose Adapter Included
    Hose Adapter Required
    Hose Adapter Thread Size (in.)
    1 NPT
    Overall Depth (in.)
    Pump Material
    Sold individually
    Pump Finish
    Blue anodized
    Weight (lbs.)
    Manufacturer's Part Number:

    Built to Flow 35, 42, or 55 GPM!
    Perfect for 12- and 16-Volt Electrical Systems

    Remote pumps are the solution when an engine-mounted pump is not available or space limits the ability to use one. These bulkhead-style pumps mount to the frame, firewall, or back of a motor plate. All plumbing inlets/outlets are on one side to install easily and to eliminate any need for a water manifold or distribution block. Standard 100 Series Pumps flow 35 gpm while heavy-duty 100 Series Pumps flow 42 gpm. The 300 Series offers a high-flow water pump at 55 gpm. The pump housing, motor cap, and impeller are CNC-machined from 6061-T6 billet aluminum, and a stainless steel impeller shaft runs through a carbon-ceramic seal to isolate the epoxy-coated motor from coolant. The motor also has a radio frequency suppression circuit to reduce ignition (RF) interference.

  • Remote Mount Bulkhead Design for Universal Fit
  • Suitable for 12-Volt and 16-Volt Electrical Systems
  • All Stainless Steel Hardware and 4130 Mounting Bracket Included
  • Billet Aluminum Impeller, Pump Housing, and Motor Cap
  • Stainless Steel Impeller Shaft
  • 1-Piece Carbon-Ceramic Seal
  • 100 Series Free-Flow Rating: Standard Motor 35 or Heavy Duty Motor 42 gallons per minute
  • 100 Series Pumps: 1'' NPT Single Inlet Port and Dual -12AN O-Ring Outlet Ports
  • The standard 35 gpm pump is suitable for normally aspirated engines up to 650 HP
  • 300 Series Free-Flow Rating: 55 gallons per minute
  • 300 Series Pumps: Single Inlet Port Accepts Meziere ''WN'' Fittings and Dual -12AN O-Ring Outlet Ports
  • Supercharged, turbocharged, and high-compression high-horsepower applications should use the 55 gpm pump
  • 2-Year Unlimited Mileage Guarantee
  • Available Polished, Chrome, Black, Blue, or Red
  • Made in the USA

  • Items You Need