1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Meziere WP173S

100 Series Electric Water Pump Ford 1994-95 5.0L Mustang

Meziere WP173S

680-WP173S

jegs shipping
FREE Shipping
Ships 12/15/16 if Ordered Today
Meziere WP173S 100 Series Electric Water Pump Ford 1994-95 5.0L Mustang $382.10
100 Series Electric Water Pump
  • Ford 1994-95 5.0L Mustang
  • 35 GPM
  • Standard Motor
  • Black Anodized Finish

  • Meziere WP173S Details

    Ford - 1994-95 5.0L Mustang

    This pump is the right choice if you have a later model front cover on your 5.0L or 351 engine. This is known as the 1994-95 design and is also shared by Ford Motorsports front covers. In addition, this has been the design chosen universally for front covers purchased with belt cam drive systems.

    If you are using a stock style front cover you will need the back plate to complete the system. If you have an aftermarket cam belt drive system, you will not need the back plate. This pump is suitable for all known belt drive systems including Danny-B, Yates, Jesel and Race Master.



    Features:
  • Fits small block Ford late model (1994 and later) with short water pump front cover
  • Suitable for street or drag strip use - 2500+ hour life expectancy
  • Show quality polished finish
  • Standard motor provides 35 gallons per minute free flow rating
  • All stainless steel hardware included
  • Light weight. Complete standard small block Ford unit weighs only 5.6 pounds!
  • Stainless steel large diameter main shaft with high performance ceramic seal
  • Pump will clear cam belt drives and most blower drives
  • 1'' NPT inlet adapters are available for -12AN, -16AN, -20AN, 1-1/4'', 1-1/2'' or 1-3/4'' slip hose

    Technical Specifications:
  • Belt Drives: Standard SBF design will clear Jessel belt drives and comparable belt drive systems. NOTE: If you are running a cam belt drive on your small block Ford, you will most likely need the WP173 pump. This pump will fit Yates, Danny B, Jessel, and Race Master belt drives.
  • Distributer Belt Drives: Spacers will be necessary to clear belt drive distributor systems.
  • Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet fitting and optional back plate. The fitting needs to be ordered according to the size of the lower radiator hose. A back plate will be required in all applications using a stock style timing cover.
  • Amperage draw: Under normal use the pump will draw 6-7 amps.
  • Overall Height Dimension: The standard pump is 6.10'' long from the mounting surface to the tip of the pump.
  • Pump Weight: This application weighs 5.6 lbs.

    Additional Notes: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard.
    The small block Ford engine has gone through several design changes at the factory since its inception. There are two different 35 GPM pump models that may be right for your engine.

  • Specifications:

    Amp Draw
    8.00 amps
    Flow Rate @ 12 Volts (gpm)
    35 GPM
    Hose Adapter Included
    No
    Hose Adapter Required
    Yes
    Hose Adapter Thread Size (in.)
    1 NPT
    Inlet Hose Size (in.)
    1 1/4
    Overall Depth (in.)
    6.1
    Pump Material
    Aluminum
    Quantity
    Sold individually
    Pump Finish
    Black anodized
    Weight (lbs.)
    5.6
    Manufacturer's Part Number:
    WP173S

    Keep Your Car Cool... Perfect for 12V or 16V Electrical System

    Meziere's 100 Series Electric Water Pump is lightweight and flows 35+ gallons per minute. They are ideal for mild street and Sportsman drag cars. The pump housing, motor cap, and impeller are CNC-machined from 6061-T6 billet aluminum for superior corrosion resistance. The stainless steel impeller shaft runs through a 1-piece carbon-ceramic seal that isolates the epoxy-coated motor from coolant for years of reliable service. The motor has a radio frequency suppression circuit in the motor brush card to reduce ignition "RF" interference. These 100 Series pumps are available with two motor option, standard duty and heavy duty. The HD (heavy duty) motors provide more power and RPM, increasing flow and pressure over the standard duty motors. HD motors are recommended for street cars and other continuous duty applications (where high flow model pumps are not available). Most pumps are machined with a 1" NPT port(s) to direct water into the pump using one of the inlet adapters that you choose to best suit your needs. Inlet adapters are available in slip-on rubber hose style to AN sizes, inlet fittings are sold separately and not included with pump. Most pumps and fittings are chrome, polished, or anodized. Longer inlets, extensions, and angle adapters also available.

    Meziere pumps are American made with pride and quality far superior to any other performance aftermarket company. Don't be misled by the inflated flow numbers and outlandish claims of others. Meziere says what they mean and means what they say. The 2 year, unlimited mileage guarantee and full satisfaction money back guarantee should convince you that buying Meziere is buying value!

    Features
  • Suitable for 12-Volt and 16-Volt Electrical Systems
  • Show-Quality Finish
  • All Stainless Steel Hardware
  • CNC-machined 6061-T6 Billet Aluminum Impeller, Pump Housing and Motor Cap
  • Stainless Steel Impeller Shaft
  • 1-Piece Carbon-Ceramic Seal
  • Standard Motor Provides 35 Gallons Per Minute Free-Flow Rating
  • Heavy-Duty Motor Provides 42 Gallons Per Minute Free-Flow Rating


  • Items You Need