FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Meziere WP201B - Meziere 200 Series Electric Water Pumps

Meziere WP201B - Meziere 200 Series Electric Water Pumps

Meziere#680-WP201B

200 Series Electric Water Pump w/Expansion Tank
  • Small Block Chevy
  • 35 GPM
  • Standard Motor
  • Blue Anodized Finish

    Meziere WP201B - Meziere 200 Series Electric Water Pumps Details

    Chevy - Small Block
    (Also fits GM 4.3L V6)

    Reservoir pumps - Fill it and forget it!
    Meziere reservoir pump is the most innovative solution for those difficult-to-fill systems. It was specifically designed for dragsters where the radiator is laying down flat; either in the front of the driver or over the transmission. It has also proven to be a great help in some kit car applications and other situations where the radiator is inaccessible. Its integrated surge tank makes these systems easy to fill in just a fraction of the time. This pump provides a cure for the problems associated with low and horizontal mounted radiators. The built in expansion tank serves as a fill point and air separator. With the pressure cap located at the correct spot in the system, the system fills easily with the pump running and maintains the level by purging accumulated air before any water escapes. With a head of water above a self priming pump cavity, this design eliminates air locking and cavitation.

    Features:
  • Fits small block Chevrolet
  • Reservoir design eliminates cavitation and air locking
  • Suitable for street or drag strip use - 2500+ hour life expectancy
  • Show quality finish
  • Standard motor provides 35 gallons per minute free flow rating
  • All stainless steel hardware included
  • Light weight. Complete standard small block Chevy unit weighs only 8.2 pounds!
  • Stainless steel large diameter main shaft with high performance ceramic seal
  • Pump will clear cam belt drives and most blower drives
  • 1'' NPT inlet adapters are available for #12AN, #16AN, #20AN, 1-1/4'', 1-1/2'' or 1-3/4'' slip hose

    Technical Specifications:
  • Belt Drives: Standard SBC design will clear Jessel belt drives and comparable belt drive systems.
  • Distributer Belt Drives: This pump will not clear belt drive distributor systems.
  • Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet fitting. The fitting needs to be ordered according to the size of the lower radiator hose.
  • Amperage draw: Under normal use the pump will draw 6-7 amps.
  • Overall Height Dimension: The standard pump is 6.75'' long from the mounting surface to the tip of the pump.
  • Pump Weight: This application weighs 8.2 lbs.

    Additional Notes: The standard 35GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard.

  • Meziere WP201B - Meziere 200 Series Electric Water Pumps

    Built to Flow 35+ Gallons Per Minute!
    Perfect for 12- and 16-Volt Electrical Systems

    Mezieres aluminum 200 Series Electric Water Pumps are lightweight and flow 35+ gallons per minute. The pump housing, motor cap, and impeller are CNC-machined from 6061-T6 billet aluminum for superior corrosion resistance. A stainless steel impeller shaft runs through a carbon-ceramic seal that isolates the epoxy-coated motor from coolant for lasting reliability. The motor has a radio frequency suppression circuit to reduce ignition/RF interference. There are two motor options: standard duty and heavy duty (heavy duty offers more power and RPM with increased flow and pressure for street cars and other continuous applications where high-flow pumps aren't available). Most of these water pumps have 1'' NPT port(s) to direct flow using an inlet adapter of your choice (sold separately). Meziere offers extensions, longer inlets, and angle adapters if needed.

    A great solution for problems stemming from radiators that are mounted low or horizontally, 200 Series Electric Water Pumps have a built-in expansion tank to act as a fill point and air separator. Returning the pressure cap to the low-pressure side allows easy filling of the system while the pump runs, and the level is maintained by purging air before any water escapes (i.e. air locking and cavitation are eliminated). Though specifically developed for dragsters where the radiator is placed flat in front of the driver or over the transmission, this design can help other vehicles with an inaccessible radiator.

    200 Series Water Pump Features:
  • Suitable for 12-Volt and 16-Volt Electrical Systems
  • 1-Piece Carbon-Ceramic Seal
  • Stainless Steel Impeller Shaft and Hardware
  • Billet Aluminum Impeller, Pump Housing, and Motor Cap
  • Built-In Expansion Tank Serves as Fill Point and Air Separator
  • Standard Motor Provides 35 Gallons per Minute Free-Flow Rating
  • Heavy Duty Motor Provides 42 Gallons per Minute Free-Flow Rating
  • 2-Year Unlimited Mileage Guarantee
  • Made in the USA






    Click on engine below to see your new Meziere 200 Series Electric Water Pump!
    Chevy - Small Block
    Chevy - Big Block
    Chrysler - Big Block
    Ford - Big Block

  • Meziere WPS101-1.5B - Meziere Water Pump Spacers and Block Adapters
    Only $50.11

    Meziere WPS101-1.5C - Meziere Water Pump Spacers and Block Adapters
    Only $81.43

    JEGS Performance Products 80600 - JEGS Chisel/Scrapers
    Only $9.99

    JEGS Performance Products 80601 - JEGS Chisel/Scrapers
    Only $9.99


    See All Items You Need