Jegs Free Catalog
Orders Over $95
Same Day Shipping Before 11 PM ET
My Cart
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Milodon 11300

Main Caps Small Block Chrysler 318-340

Milodon 11300
Representative Image
Product images may differ from actual product appearance.


made in usa
jegs shipping
FREE Shipping
Estimated ship date 05/05/17 if Ordered Today
Milodon 11300 Main Caps Small Block Chrysler 318-340 $313.95
Main Caps
  • Small Block Chrysler 318-340
  • Angled Bolts

  • Specifications:

    Machine Work Required
    Main Cap Fastener Quantity
    Main Cap Fastener Style
    Main Cap Fasteners Included
    Main Cap Material
    Ductile iron
    Main Cap Position
    Main Cap Retention Style
    Sold as a set
    Manufacturer's Part Number:

    These aftermarket main caps will strengthen not only factory 2 bolt blocks, but also 4 bolts. Unlike the factory caps, these not only have more cross sectional strength, but the real secret is in the angled side bolts!
    The side bolts are angled so they pull from the side walls of the block and not the flimsy main web area. A bolt that is angled will require a massive amount of additional load to flex or stretch, let alone break, compared to a conventional straight up bolt. The side bolts heavily load the cap against the register step which stops ''cap walk''. It is cap walk that causes a great amount of unforeseen bearing damage and horsepower loss.
    Milodon main caps are CNC machined from high strength ductile material which has the proper balance of strength yet is not too rigid that would allow transfer of increased shock loads to the crank and bearings. In this case more is not better when it comes to hardness.
    Only .030'' of material removal is required upon initial installation, which will allow 100% cleanup on a damaged block. The drill bushing used to drill and tap the side bolt holes is included in the kit. The side bolts can be installed by anyone with a hand drill and a tap. If the block has square main registers, the block needs only a standard align bore to finish the job. Milling the mains is only necessary if the main registers are not square.
    All necessary bolts, washers and the drill bushing are included in the center three cap kit. For maximum strength the installation of Milodon main studs are highly recommended.
    Made in the U.S.A.

    Items You Need