FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Milodon 30906 - Milodon Street/Strip Oil Pans

Milodon 30906 - Milodon Street/Strip Oil Pans


Small Block Chevy Oil Pan
  • 1955-79 Small Block
  • Low Profile Stoker
  • Left Hand Dipstick
  • 6-Quart Capacity Plus Filter
  • 8-1/4'' Deep Sump
  • No Tray Installed
  • Silver Plated
    • Fits Applications:
    • 1977-1979
    • Click to see All

    Milodon 30906 - Milodon Street/Strip Oil Pans Details


    High power output design uses a deeper pan front to allow the use of a full length competition style windage to yield the most available power. Tray fastened into the pan so no extra mounting is required. Pan fits stock crossmember without modification when the correct Tall-Narrow frame and engine motor mounts are used. The Short-Wide mounts can not be used. Low profile sump allows good ground clearance, use of the stock starter and oil filter yet increases capacity. Includes high strength magnetic drain plug. Pan fits a 4" stroke crank with steel Carillo or Eagle style rods. Pan Capacity is 6 Quarts Plus Filter - 8 1/4" Sump Depth

    Milodon 30906 - Milodon Street/Strip Oil Pans

    Designed for performance street and drag strip applications, these well engineered oil pans actually free up additional horsepower. Deep sumps provide ample oil supply and the low profile give adequate oil supply and maximum available ground clearance. Clears stock chassis, steering and most headers as listed. This is a necessity where high volume oil pumps and increased RPM ranges are used. Made in the U.S.A.

    Street/Strip - Low Profile

    The Low Profile "triangulated" sump design that was originally developed by Milodon over two decades ago gives both adequate ground clearance, as well as sufficient oil capacity for any kind of high performance use. This pan is equally suited for use on the street or strip. Oil control baffles 100% subdue oil movement and provide increased horsepower.

    Street/Strip - Stroker Low Profile

    Uses high horsepower output design. The front of the oil pan is deeper to allow the use of a full length, competition style tray included. Tray is attached in the pan by quick release fasteners to allow easy removal. The pan will fit stock crossmember cars without modification, as well as, stock starters and oil filters.

    Street/Strip - Street Performance

    Specifically designed for applications that desire improvements over stock oil pans yet do not want a high cost racing oil pan. While appearing stock on the outside, it contains sufficient horizontal baffling to 100% control 5 qts. of oil. Internal mounted windage tray provides increased power yet requires no block mounting to install. A complete low cost performance package.

    JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.

    Items You May Also Consider
    Only $216.99

    Milodon 40105 - Milodon Oil Pan Gaskets
    Only $22.99

    Milodon 85000 - Milodon Oil Pan Bolts
    Only $6.99

    Milodon 41010 - Milodon One-Piece Oil Pan Gaskets
    Only $40.99

    Milodon 18214 - Milodon Oil Pump Pickup Tubes
    Only $66.99

    See All Items You Need