Milodon 30926 - Milodon Street/Strip Oil Pans
Milodon #697-30926Small-Block Ford Oil Pan |
||||
|
|
||||
|
|
||||
Milodon 30926 - Milodon Street/Strip Oil Pans Details
Ford
These early chassis, pre 1974 front sump, low profile designs provide both increased oil capacity, as well as maximum available ground clearance. Increased oil capacity is an absolute requirement to handle the demands of higher RPM and increased horsepower. Suitable for heavy street and strip use. Oil control baffles 100% subdue any unwanted oil movement, which results in consistent oil pressure and increased horsepower output. Will fit all stock front sump chassis, all stock starters, all stock exhausts, and nearly all headers.
8.75'' deep sump, 9'' sump length, 11'' sump width.
Use oil pump pickup P/N 697-18365,
Oil pump shaft P/N 697-22560,
Windage tray P/N 697-32215,
Windage tray installation kit P/N 697-81167.
Designed for performance street and drag strip applications, these well engineered oil pans actually free up additional horsepower. Deep sumps provide ample oil supply and the low profile give adequate oil supply and maximum available ground clearance. Clears stock chassis, steering and most headers as listed. This is a necessity where high volume oil pumps and increased RPM ranges are used. Made in the U.S.A. Street/Strip - Low Profile
The Low Profile "triangulated" sump design that was originally developed by Milodon over two decades ago gives both adequate ground clearance, as well as sufficient oil capacity for any kind of high performance use. This pan is equally suited for use on the street or strip. Oil control baffles 100% subdue oil movement and provide increased horsepower. Street/Strip - Stroker Low Profile
Uses high horsepower output design. The front of the oil pan is deeper to allow the use of a full length, competition style tray included. Tray is attached in the pan by quick release fasteners to allow easy removal. The pan will fit stock crossmember cars without modification, as well as, stock starters and oil filters.
Street/Strip - Street Performance
Specifically designed for applications that desire improvements over stock oil pans yet do not want a high cost racing oil pan. While appearing stock on the outside, it contains sufficient horizontal baffling to 100% control 5 qts. of oil. Internal mounted windage tray provides increased power yet requires no block mounting to install. A complete low cost performance package. 
JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.
