Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

Milodon 30930 - Milodon Street/Strip Oil Pans



Milodon 30930 - Milodon Street/Strip Oil Pans
Milodon 30930 - Milodon Street/Strip Oil Pans

JEGS Part Number: 697-30930

Big Block Chrysler Oil Pan
  • 383/426/440ci
  • Low Profile
  • 7-Quart Capacity Plus Filter
  • 7'' Deep Sump
  • For 66-Up A,B,E Body

    Milodon 30930 Details

    Chrysler

    Low profile design fits all A, B and E bodies, provides increased capacity and maximum available ground clearance. Increased oil capacity is an absolute requirement to handle the demands of higher RPM and increased horsepower. Oil control baffles 100% subdue any unwanted oil movement which results in consistent oil pressure and increased horsepower output.
    Use oil pump pickup 697-18325 with stock 383-400 3/8'' pipe inlet or use oil pump pickup 697-18335 with inlet opened to 1/2'' (stock Hemi) pipe.

    Milodon Street/Strip Oil Pans


    Designed for performance street and drag strip applications, these well engineered oil pans actually release additional horsepower. Deep sumps provide ample oil supply and low profiles provide adequate oil supply with maximum ground clearance (clears stock chassis, steering, and most headers as listed). This feature is a necessity where high-volume oil pumps and increased RPM ranges are used.
    Made in the USA.


    Street/Strip: Low-Profile
    Low-profile "triangulated" sump design originally developed by Milodon over two decades ago gives both adequate ground clearance and sufficient oil capacity for any high-performance use. This pan is equally suited for use on the street or strip. Oil control baffles 100% subdue oil movement and provide increased horsepower.

    Street/Strip: Low-Profile Stroker
    Uses high-horsepower output design. The front of the oil pan is deeper to allow the use of a full-length competition-style tray. Tray is attached in the pan by quick-release fasteners to allow easy removal. The pan fits stock crossmember without modification, as well as stock starters and oil filters.

    Street/Strip: Street Performance
    Specifically designed for applications that require improvements over stock oil pans without the high cost. While appearing stock on the outside, it contains sufficient horizontal baffling to 100% control 5 quarts of oil. Internally mounted windage tray provides increased power yet needs no block mounting to install. A complete low-cost performance package.

    JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.

    Items similar to Milodon 30930

    Milodon 30930

    Hardware Included
    No
    Rear Main Seal Style
    2-Piece
    Gaskets Included
    No
    Baffled
    YES
    Crank Scraper Included
    No
    Dipstick Provision
    No
    Drain Plug Thread Size (in.)
    1/2/2020
    Kickout Position
    Driver and passenger side
    Maximum Stroke with OE Rod (in.)
    4.75
    Oil Pan Capacity
    7 quarts
    Oil Pan Depth (in.)
    7
    Oil Pan Finish
    Gold iridited
    Oil Pan Material
    Steel
    Pickup Included
    No
    Quantity
    Sold individually
    Stroker Clearanced
    Yes
    Sump Location
    Center
    Sump Style
    Wet
    Windage Tray Included
    No
    Kicked Out
    Yes
    Manufacturer's Part Number:
    30930
    Items You May Also Consider
    Only $201.97

    Ships
    Only $203.95

    Ships
    Only $185.81

    Ships
    JEGS Performance Products 28030 - JEGS RTV Silicone Gasket Maker
    Only $4.69

    Milodon 18325 - Milodon Oil Pump Pickup Tubes
    Only $45.95

    Milodon 32000 - Milodon Windage Trays
    Only $63.95

    Milodon 21505 - Milodon Oil Pump Shafts
    Only $120.95


    See All Items You Need