FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Milodon 30970 - Milodon Street/Strip Oil Pans

Milodon 30970 - Milodon Street/Strip Oil Pans


Big Block Chevy Oil Pan
  • 1965-90 Mark IV
  • 1955-57 Chevy Chassis
  • 6-Quart Capacity Plus Filter
  • 7-3/4'' Deep Sump

    Milodon 30970 - Milodon Street/Strip Oil Pans Details


    Made specially for the early 1955, 56 and 57 Chevy chassis, this pan is ready for use on the street and strip. This pan allows adequate steering clearence even if the engine is moved forward, as many mount kits do. This Mark IV pan has notched rails for up to a 4.500'' stroke with most aluminum rods.
    Use Milodon Oil Pump 697-18760,
    Oil pump pickup 697-18302,
    Oil pump shaft 697-23060,
    Windage tray 697-32200 (solid louvered style) or 697-32260 (diamond mesh style),
    Windage tray installation kit 697-81151,
    Rear pan baffle 697-32505,
    Dipstick 697-22010.

    Milodon 30970 - Milodon Street/Strip Oil Pans

    Designed for performance street and drag strip applications, these well engineered oil pans actually free up additional horsepower. Deep sumps provide ample oil supply and the low profile give adequate oil supply and maximum available ground clearance. Clears stock chassis, steering and most headers as listed. This is a necessity where high volume oil pumps and increased RPM ranges are used. Made in the U.S.A.

    Street/Strip - Low Profile

    The Low Profile "triangulated" sump design that was originally developed by Milodon over two decades ago gives both adequate ground clearance, as well as sufficient oil capacity for any kind of high performance use. This pan is equally suited for use on the street or strip. Oil control baffles 100% subdue oil movement and provide increased horsepower.

    Street/Strip - Stroker Low Profile

    Uses high horsepower output design. The front of the oil pan is deeper to allow the use of a full length, competition style tray included. Tray is attached in the pan by quick release fasteners to allow easy removal. The pan will fit stock crossmember cars without modification, as well as, stock starters and oil filters.

    Street/Strip - Street Performance

    Specifically designed for applications that desire improvements over stock oil pans yet do not want a high cost racing oil pan. While appearing stock on the outside, it contains sufficient horizontal baffling to 100% control 5 qts. of oil. Internal mounted windage tray provides increased power yet requires no block mounting to install. A complete low cost performance package.

    JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.

    JEGS Performance Products 28030 - JEGS RTV Silicone Gasket Maker
    Only $6.99

    Mr. Gasket 5883 - Mr. Gasket Oil Pan Gaskets
    Only $20.99

    JEGS Performance Products 210192 - JEGS Oil Pan Gaskets
    Only $15.99

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    See All Items You Need