1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Milodon 31188

Drag Racing Oil Pan Big Block Chevy Mark IV (1965-90)

Milodon 31188

697-31188

made in usa
jegs shipping
FREE Shipping
Ships
Milodon 31188 Drag Racing Oil Pan Big Block Chevy Mark IV (1965-90) $505.95
Drag Racing Oil Pan
  • Big Block Chevy Mark IV (1965-90)
  • Full Kick-Out With Dipstick Provision
  • Pan Capacity: 8 Quarts Plus Filter
  • Front Depth: 4-3/4"
  • Rear Depth: 8-1/2"

  • Milodon 31188 Details

    Big Block Chevy

    Used in stock framed cars where maximum power output is needed. Designed to fit into cross membered cars such as Camaros and Chevelles with only a reasonable amount of cross member modification. This horsepower style pan incorporates lightweight steel construction with a full length kick-out and full-length louvered tray assembly. Pan will accept a factory large diameter flywheel starter. With most aluminum rods, pan will fit up to a 4-1/2" stroke without modification.


    NOTE: For very big stroker engines or engines that see 7-8 second passes with nitrous or blown use, the Extreme Duty pickup 697-18201 should be used.

    Specifications:

    Hardware Included
    No
    Rear Main Seal Style
    2-Piece
    Dipstick Location
    Passenger side
    Gaskets Included
    No
    Baffled
    YES
    Crank Scraper Included
    No
    Dipstick Provision
    Yes
    Drain Plug Thread Size (in.)
    1/2-20
    Kickout Position
    Passenger side
    Maximum Stroke with OE Rod (in.)
    4.5
    Oil Pan Capacity
    6 quarts
    Oil Pan Depth (in.)
    8.5
    Oil Pan Finish
    Gold iridited
    Oil Pan Material
    Steel
    Pickup Included
    No
    Quantity
    Sold individually
    Stroker Clearanced
    Yes
    Sump Location
    Rear
    Sump Style
    Wet
    Windage Tray Included
    Yes
    Kicked Out
    Yes
    Manufacturer's Part Number:
    31188

    Milodon Drag Racing Oil Pans are designed to provide optimal oiling for your engine during the adverse conditions of drag racing. Each pan features a sump and baffling that is engineered to give you more horsepower. Made in USA.

    JEGS Easy Kits are designed by JEGS Professionals to help you get all the performance parts you need.

    31188 - Milodon Drag Racing Oil Pans is rated 5.0 out of 5 by 1.
    • 2016-12-02T08:23CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_90390, PRD, sort_relevancy
    • clientName_jegs
    Rated 5 out of 5 by from Fixed my issues I bought this pan because my 540 would have the oil pressure drop before the finish line. I had a very popular 6 qt pan on this motor as the rpm went up the oil pressure would go down to 40psi . This pan has a very good windage set up. I don't think the pan can be installed without the stud kit. The right side of the pan has a nice kickout but there is no room for a socket so the nut have to be started with 2 fingers and tighted with an open end wrench. My drag car has no cross member so this was not an issue.
    Date published: 2015-06-23
    • 2016-12-02T08:23CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_90390, PRD, sort_relevancy
    • clientName_jegs
    Items You Need