Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
Shop By Vehicle
Shop By
All Categories

Gift Certificates
My Account
E-Mail Signup
Catalog Request

Moroso 47160

Trick Front Springs 1610-1680 lbs 242 lbs/in

Moroso 47160

Part Number: 710-47160

Trick Front Springs
  • 1610-1680 lbs; 242 lbs/in
  • $127.99
    Made In USA
    FREE Shipping
    Moroso 47160 Trick Front Springs 1610-1680 lbs 242 lbs/in $127.99

    Moroso 47160 Details


  • 1968-72 Chevelle / Malibu / Monte Carlo / Special / Skylark / GS / Regal / Cutlass / 442 / Tempest / LeMans / GTO, Small Block Chevy*
  • 1965-76 Mustang, 390/427/428

    Front End Weight: 1610-1680 lbs
    Spring Rate: 242 lbs/in

  • Specifications:

    Spring Type
    Bushings Included
    For Street Use
    Front Leaf Spring Bushings Included
    Maximum Front-End Weight (lbs.)
    Minimum Front-End Weight (lbs.)
    Progressive Rate Spring
    Sold as a pair
    Spring Position
    Spring Rate
    242 lbs./in.
    Spring Finish
    Black powdercoated
    Manufacturer's Part Number:

    Moroso designed their trick front coil springs to ''store'' energy for instant, maximum weight transfer for launching. The springs are tall and constructed from small diameter wire to be the correct rate for the particular listed application, although slight trimming may be required to achieve the desired ride height. Sold in pairs. For drag racing only; NOT for street use.

  • Designed for drag racing where maximum weight transfer is needed
  • Trick front springs are tall small wire diameter coil springs that hold a great amount of stored energy for instant weight transfer
  • Replaces stock OEM spring with no modifications
  • 2 springs per package

    Note: To get the desired front end height, it may be necessary to modify the springs. If it is too high it may be lowered by cutting off one-half of a coil Many factors affect the front end height Wheel offset is a major consideration A front wheel offset to the outside will increase leverage of the lower A-frame against the coil spring, and the nose of the car will be lower Disc brake spacers will further affect the height Adding or removing as little as 50 lbs can also make a big difference Take this into consideration when adding a fiberglass hood, aluminum heads, or when putting the battery in the trunk Although these changes will affect the height of the car, the spring rates will be unaffected as long as you stay within the guidelines.

    * Other GM-built engines can effect front end weight significantly. Weigh front end to ensure proper spring selection.

  • Items You Need