0
0
×
Account Login
1-800-345-4545
Gift Cards
Track Order
Help Center

Motive Gear Ring & Pinion Gears Ratio: 3.73

683-G882373


Product Q&A
View Now
Click image to zoom
Ring & Pinion Gears Ratio: 3.73
$400.99
4 left in stock
Ring & Pinion Gears
  • Ratio: 3.73
  • Teeth: 41-11
  • Free Shipping - Ships
    QTY

    Items You May Also Consider

    G882373 is rated 1.0 out of 5 by 1.
    Rated 1 out of 5 by from Never Again Installation into a '71 El Camino with 10 Bolt 8.2" rear. Pinion depth didn't allow for any spacers to shim to get a good pattern, and the final pattern was outside on the drive side to get a fair pattern on the coast side (no shims). Backlash set to .007". Pinion depth stated 2.559" where factory is 2.40" with .027" shims. Initial measurement called for .003" shim (never included in an install kit so I had to find one) but pattern indicated pinion too deep on the coast side. I've built numerous rear ends, and this is by far the worst ring and pinion set I've received. Will run it and see how it goes, if it doesn't workout, another brand is going in.
    Date published: 2018-02-11
    • y_2024, m_4, d_15, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_1333407, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Related Categories

    Related Products

    Specifications:Ring Gear Diameter: 8.5"10-3/8" x 24 Right Hand Threaded BoltsPinion Diameter: 1.376" 26-SplinesCase: 3.73 & Numerically Lower, 3.92 & Numerically Higher8620 Material - Heat TreatedApplications:1967-96 Bronco (F)1980-82 Bronco II (F)1981-01 Cherokee1985-On Comanche XJ1980-88 Concord1997-99 ...
    Close
    Specifications: Ring Gear Diameter: 8.5" 10-3/8" x 24 Right Hand Threaded Bolts Pinion Diameter: 1.376" 26-Splines Case: 3.73 & Numerically Lower, 3.92 & Numerically Higher 8620 Material - Heat Treated Applications: 1967-96 Bronco (F) 1980-82 Bronco II (F) 1981-01 Cherokee ...
    Close
    Specifications: Ring Gear Diameter: 9.75" 12-1/2" x 18 Right Hand Threaded Bolts Pinion Diameter: 1.626" 29-Splines Case: 4.10 & Numerically Lower, 4.56 & Numerically Higher 8620 Material - Heat Treated Applications: 1966-72 Dodge & Plymouth Cars w/ Hemi Engines 1977-95 ...
    Close

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.