150-500+ Horsepower
Direct Port Injection

Designed with the pro in mind, the Pro Shot Fogger is the ultimate in technology for producing the largest horsepower gains of any single-stage nitrous system available today. The Pro Shot Fogger utilizes patented Fogger2 Nozzle technology for the ultimate in combustion, distribution and adjustability, allowing each cylinder to be injected with a precise cool, dense fuel laden nitrous ''fog'' mixture. Featuring Pro Shot solenoids, power levels may be adjusted from 150 HP, to well above 500 extra HP. The Pro Shot Fogger system is designed primarily for highly modified V-8 engines built with extra strength, race quality engine and drive train components. The Pro Shot Fogger System includes a 10lb. capacity nitrous bottle, Super Pro Shot nitrous and fuel solenoids, Fogger2 nozzles (including a tap, #15990, for plumbing Fogger2 nozzles), filters, fittings, tubing, distribution blocks, jets for 250 & 300 extra HP, switches, larger -6an aircraft quality steel braided hose and all other necessary hardware for a complete installation. Requires removal of intake manifold for plumbing. Kit includes 250-450hp jets.

Sytem Requirement:
To supply the carburetor and the Pro Shot Fogger System use a fuel pump designed to operate between 5 and 10 psi with a flow rate of 0.1 gallons per hour per horsepower at 5 psi. Please note that most aftermarket pumps are rated under free flowing conditions. At 5 psi their flow rates may be greatly reduced. Check the manufacturer's specifications carefully or have the pump checked before you use it. Due to the high power levels and cylinder pressures produced by Pro Shot Systems you must use high quality forgings for pistons, rods and crankshaft. Four bolt blocks with cylinder head studs will help insure reliability. A high quality racing ignition system must be used with these systems.