FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

On 3 Performance AF2 - On 3 Performance Turbo Kit 96-04 4V Mustang Cobra Front Mount

On 3 Performance AF2 - On 3 Performance Turbo Kit 96-04 4V Mustang Cobra Front Mount

On 3 Performance#498-AF2

Air Filter
  • Gray Washable Element

    On 3 Performance AF2 - On 3 Performance Turbo Kit 96-04 4V Mustang Cobra Front Mount

    11 Second ET's At 120MPH+ With Stock Bottom End!!!

    With almost a year in development this 2nd generation turbo kit for the Mustang 4v Cobra with forward facing headers will out perform the 1st generation kit at the same boost level by picking up almost 30rwhp/50ft. lbs. mid-range. Most of this is due to the improved front mount design and being able to spool the turbo quicker by eliminate about 4'+ of tubing pre-turbo. This also allowed us to route the intercooler and downpipe tubing for additional ground clearance.
    Aluminum intercooler tubing was used to save over 15lbs from the 1st gen kit, allow for slightly cooler IAT's as well as a shorter, more direct path which also has shown us the benefits. Additionally a few other features were added to make the installation easier and prevent issues down the road including a newly designed and laser cut intercooler bracket kit, as well as a turbo support bracket that allows the weight of the turbo system to be tied back to the engine. This way the weight of the pre-turbo tubing and turbo is supported by the bracket instead of the actual tubing.
    Each turbo system comes with the On3 70mm turbocharger which is rated up to 700hp. Currently our 2v shop car has around 20,000 miles and 3 years of daily driving year-round. We have proven the turbos durability over time and if maintained and installed correctly, its unbeatable for the money.

    On 5psi, you will have full boost in the upper 2000RPM range, that's around 700-800RPM quicker than the 1st gen kit. There is nothing like turbocharged power on your modular 4.6 Mustang, bolt on and double the factory horsepower. This kit has been proven to put you deep into the 11's on a stock bottom end 4v car. You will have no problem trapping 120+ mph, we are trapping almost 121mph with our shop test car; a 2002 2v GT.

    Key Turbo Kit Features:

  • Perfect fit for automatic transmissions
  • Retains factory accessories - Air conditioning and Power steering
  • Quicker spooling
  • Forward facing turbo headers
  • Less exhaust connections pre-turbo
  • Turbo support bracket/Intercooler brackets included
  • Better fit on the SN body cars to clear coil packs
  • More simple design to eliminate tubing
  • Easier to install and adjust the kit
  • Maximum ground clearance

    Each kit includes:

  • Forward facing headers (pr) 3mm thick mild steel for durability on daily driven cars
  • Merge pipes 304 stainless steel (2pcs)
  • Downpipes with slip fit design for easier installation and adjustment (From turbo to catback, includes merge to hook up to your catback: 3 pipes)
  • Dual wastegate dump tubes 304 stainless steel
  • Each pipe coming off the manifolds pre-welded with o2 bungs
  • Downpipe is pre-welded for a Wideband sensor
  • Headers welded for both upstream o2 sensors
  • Turbo to intercooler pipe (Aluminum)
  • Intercooler to throttle body pipe (Aluminum)
  • On 3 Performance 70mm, .70ar cold/.68 hot T-4 Flanged (time tested and proven design)
  • On 3 Performance Laser Cut Turbo Support Bracket
  • On 3 Performance 3" Core Bar and Plate Front Mount Intercooler
  • Stainless Steel upper/lower radiator hose (Relocated to clear the turbo)
  • On 3 Performance 38mm Wastegate (Black) (2pcs)
  • Wastegate springs - Includes Qty 3
  • On 3 Performance 50mm Blow-off Valve (Black)
  • Custom CNC bent Stainless Steel power steering cooler line
  • Complete Oil feed kit from block to turbo, includes all brass fittings needed
  • Complete Oil drain kit from turbo to oil pan
  • Custom CNC formed stainless steel power steering line
  • On 3 Performance oil relocation kit
  • All 4ply/5mm Black silicone couplers
  • T-bolt clamps
  • On 3 Performance stainless lap bands
  • Extended length sway bar end links
  • All Stainless Steel 2 ½" and 3" V-bands needed
  • Hardware kit
  • Detailed Instruction CD w/ Photos

    Installation Notes:

  • This kit will require the installation of a tubular k-member. It was designed to be used with either the Granatelli or QA1 k-member
  • The Cobra's also have a oil cooler built into the factory oil filter assembly at the block, the smaller 2V version will be needed.

    Additional Fuel and Tuning is required but not included with kit

  • Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $8.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69

    Grime Boss M956S8X - Grime Boss Hand Wipes
    Only $14.99