FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

PJ1 SP670 - VHT Epoxy Paint

PJ1 SP670 - VHT Epoxy Paint

PJ1#322-SP670

Spray Epoxy Plus Chassis Coat, Gloss Black
ORMD Item - Ground Shipping Only

PJ1 SP670 - VHT Epoxy Paint Details

  • Features EZ Touch Conical Nozzle
  • Self Priming Durable Finish
  • All Weather Rust and Corrosion Resistant
  • Ceramic Resins Resist Heat Up To 250 Deg. F
  • Dry To Touch In 30 Minutes / Handle In 1 Hour
  • Ideal For Roll And Nerf Bars/Frame And Suspension

  • PJ1 SP670 - VHT Epoxy Paint

    VHT EPOXY PAINT is an exclusive air dry one-step epoxy ester resin system which effectively Stops Rust from forming on all types of metal. It provides excellent adhesion to protect against harsh environments and to maximize corrosion protection. VHT EPOXY PAINT is an All Weather coating that dries to an exceptionally hard finish and is ideal for use on metal, wood, masonry and most fiberglass surfaces. VHT EPOXY PAINT is formulated for interior or exterior use and is self-priming on non-oxidizing substrates.

    Application: Sand or wire brush rusted areas making sure the surface is clean and free of grease, dirt, rust and loose paint. Lightly sand previously painted surfaces to dull the gloss or use a deglosser for maximum adhesion. Hold the can 12 to 14 inches away from the surface and spray in one direction using long even strokes. Repeat this procedure in the opposite direction. On vertical surfaces point the top of the can slightly downward working the wet areas of the spray as you progress down the area to be painted. Continue to apply even coats until a smooth even coat is achieved. On the final coat, move the can closer to the surface approximately 6 to 10 inches for maximum gloss.
    Note: After you have achieved a true color, you may find some areas are glossier than others. This is normal and is only overspray. Allow to cure 30 days and lightly buff with a high quality rubbing compound or glass wax to even out the gloss.

    VHT ''EPOXY PLUS'' ROLL BAR & CHASSIS COATINGS contain a one-step Epoxy Ester resin which dries in minutes to provide an exceptional rust and corrosion resistant finish. The rust inhibitors which are added to this product provide a rust proof barrier when applied to new or properly prepared metal substrates. As an added feature, VHT ''EPOXY PLUS'' needs no primer when applied to a clean dry surface. It is truly a one-step coating designed for interior or exterior applications. When applied to ferrous metals, it primes, finishes and prevents rust. VHT ''EPOXY PLUS'' is tough enough for industrial use.
    VHT ''EPOXY PLUS'' is formulated to give the appearance and durability of a baked-on finish. It provides a porcelain like finish that is chemical and corrosion resistant and has excellent adhesion.

    PJ1 322-SP670

    Color
    Black
    Application
    Chassis
    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69