Paxton 1201851P - Paxton Mopar Carbureted Supercharger Kits Details

Complete Supercharger Systems

Includes a cast aluminum carburetor enclosure assembly (for the use with Holley #4150 type, Quick Fuel 793-Q-750BAN or Demon 650 MD 4-BBL carburetor, mechanical secondary's, .120 needle and seat plus nitrophyll float set). The enclosure pressurizes the float bowls and throttle shafts for seamless response and correct air/fuel ratio. It features front and rear -8 AN fuel inlet ports as well as multiple locations for pressure/vacuum connections. Linkage arms, splined shaft and left/right hand spherical rod ends are included for simple throttle connection and adjustment. If the Holley carburetor is used, an air diffuser (769-8M011-001) is recommended. Also included is a 10-rib supercharger drive system with necessary belts and pulleys (for use in V-belt set-up), billet aluminum mounting plate configuration for alternator and supercharger drive assembly; aluminum discharge tube with bypass valve and high-flow air filter.

To determine under hood clearance, measure the carb enclosures height of 7 1/2'' to the top of your intake manifold. A replacement hood or hood modifications may be required. A custom carburetor fuel line assembly will be required for use with enclosure. This includes custom bent stainless steel lines, billet -8 bulkhead adapter with fuel pressure port and plug, -8/-6 junction tee, aluminum swivel hose ends and USCG approved fuel hose. High-volume, boost referenced fuel pump is not included and will be required. An optional aftermarket ignition amplifier is recommended, but not required. Accessory v-belts will vary per application depending on accessory configuration and supercharger pulley diameters. Vehicle throttle cable/arm modifications may be required.