800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

RAM Clutches 80-2100N

Force 10.5N Dual Disc Clutch System GM LS1/LS2/LS3/LS6/LS7

RAM Clutches 80-2100N

798-80-2100N

made in usa
jegs shipping
FREE Shipping
Ships from Manufacturer
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
RAM Clutches 80-2100N Force 10.5N Dual Disc Clutch System GM LS1/LS2/LS3/LS6/LS7 $1,489.00
Force 10.5N Dual Disc Clutch System
  • GM LS1/LS2/LS3/LS6/LS7
  • 10-1/2'' Diameter
  • 1-1/8''-26 Spline
  • 900-Series Disc

  • RAM Clutches 80-2100N Details

    Chevrolet
    900-Series Clutch Disc

    The RAM Force 10.5 has a strap driven floater plate for completely quiet operation and works well for high horsepower street only cars and trucks. Featuring 900 series friction material rated at 1300 ft/lbs holding capacity. 900 Series clutches provide extremely high coefficients of friction with minimal chatter and reduced static pressures. This type of material is engineered to provide a limited amount of 'slip' on engagement that allows the clutch to engage without overpowering the tires. All 900 Series discs use the high strength eight spring hub and Poly-coil springs for extreme dampening capabilities. This clutch disc is recommended for severe duty street and strip applications where driveability is not the highest concern.

    Applications & Installation Notes:
  • Fits Corvette 1997-2012 (2011-up ZR-1, use clutch system p/n 798-75-2115); Camaro/Firebird 1998-2002; Camaro 2010-12; GTO 2004-07; Cadillac CTS-V 2005-11 (Replacing dual mass flywheel requires .500'' bearing spacer p/n 798-78511. Replacement input shaft required when replacing dual mass flywheel.)
  • Camaro 2010-12 use RAM hydraulic throw-out bearing p/n 798-78180
  • Camaro/Firebird 1998-02 use RAM hydraulic throw-out bearing p/n 798-78165
  • Corvette 2005-2012 use RAM hydraulic throw-out bearing p/n 798-78170
  • Corvette 1997-2004 use RAM hydraulic throw-out bearing p/n 798-78165
  • GTO 2004-07 use RAM hydraulic throw-out bearing p/n 798-78180

  • Specifications:

    Mounting Hardware Included
    No
    Flywheel Included
    Yes
    Pressure Plate Style
    Diaphragm
    Disc Diameter (in.)
    10.5
    Input Shaft Diameter (in.)
    1.125
    Pilot Bushing Included
    No
    Throwout Bearing Included
    No
    Counterweight Assist
    No
    Disc Diameter (mm)
    267
    Input Spline Quantity
    26
    Pressure Plate Static Pressure (lbs.)
    2,400
    Quantity
    Sold as a kit
    Disc Material
    Sintered metallic
    Flywheel Material
    Billet aluminum
    Alignment Tool Included
    No
    Disc Style
    1 sprung hub, 1 unsprung hub
    Manufacturer's Part Number:
    80-2100N

    Force 10.5 is THE Choice to Handle Higher Horsepower
    Based on the original RAM Street Dual design, the Force 10.5 is more street-friendly with a 3-strap system to locate the floater plate and stop the floater plate rattle that's common to stand-driven dual disc clutches. A high clamp load pressure plate ensures enough holding power to manage about 1100 ft/lbs of torque without excessive pedal pressure. There are two disc series: 300 and 900. The steel-faced 300 Series offers smooth engagement & long service life. The metallic-faced 900 Series is for torque load to about 1300 ft/lbs so expect some floater plate noise at idle. Both 300 & 900 series come paired with a billet aluminum flywheel. Ideal for larger blower or turbo setups, Force 10.5 Clutches handle more torque & weigh slightly more than their smaller counterparts. This greater inertia translates into better low-speed drivability for heavier vehicles or those with large camshaft profiles.

    Engineered for today's late model performance cars and engine swaps into older vehicles, most RAM Dual Disc Clutches are compatible with factory hydraulic release mechanisms. The setup height of the clutch is critical to proper operation; it prevents the need for spacers or other modifications to the release mechanism. Dual disc clutches that bolt to a stock flywheel can pose a release problem. For clutches that function improperly with the factory system, add a RAM Internal Hydraulic Bearing.

    The purpose of these clutches is to provide smooth drivability for high power levels that was previously unavailable from single disc clutches with aggressive friction material. The clutch assembly also needs enough weight so it can be driven at lower RPM and maintain vehicle inertia without bucking. If the clutch assembly is too light, low-end drivability suffers. Applications with large camshaft profiles are prone to this and need the inertia of a heavier unit to sustain low-speed drivability. Road race type vehicles, however, benefit from a smaller clutch's lighter weight because the vehicle drives deeper into turns before letting off the throttle and accelerates quicker back to torque range out of turns.

    Click Here for Ram Dual Disc Clutch Application Guide

    Does RAM Clutches 80-2100N fit your vehicle?

    Narrow Results

    1998-2001 PONTIAC FIREBIRD

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • Liter: 5.7
    • Aspiration: N
    • SubModel: TRANS AM
    • Engine Vin: G
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2013 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: BASE

    1997-2004 CHEVROLET CORVETTE

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: G
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2005-2007 CHEVROLET CORVETTE

    • CC: 5967
    • Liter: 6.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: U
    • CUI: 364
    • EngineType: V8 ( 6.0 L / 364 )

    2005-2006 CHEVROLET SSR

    • Fitment_Note: Rquires Slave Spacer PN[78513] Or Recommended Release Bearing PN[78170]
    • EngineType: ALL
    • SubModel: ALL

    2006-2007 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: Z06

    2010-2011 CHEVROLET CORVETTE

    • CC: 6162
    • Liter: 6.2
    • SubModel: BASE
    • CUI: 376
    • EngineType: V8 ( 6.2 L / 376 )

    1998-2002 PONTIAC FIREBIRD

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • Liter: 5.7
    • SubModel: FORMULA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2008-2009 CHEVROLET CORVETTE

    • CC: 6162
    • Liter: 6.2
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: W
    • CUI: 376
    • EngineType: V8 ( 6.2 L / 376 )

    2012 CHEVROLET CAMARO

    • Fitment_Note: Requires RAM Hydraulic Bearing PN[78180}
    • EngineType: ALL
    • SubModel: SS

    1999-2002 CHEVROLET CAMARO

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • Liter: 5.7
    • Aspiration: N
    • SubModel: Z28
    • Engine Vin: G
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2013-2015 CHEVROLET CAMARO

    • CC: 6162
    • Liter: 6.2
    • SubModel: SS
    • CUI: 376
    • EngineType: V8 ( 6.2 L / 376 )

    2002 PONTIAC FIREBIRD

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • Liter: 5.7
    • SubModel: TRANS AM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2004-2006 PONTIAC GTO

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • EngineType: ALL
    • SubModel: ALL

    2003 CHEVROLET CORVETTE

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • EngineType: ALL
    • SubModel: 50TH ANNIVERSARY EDITION

    2010-2011 CHEVROLET CAMARO

    • CC: 6162
    • Fitment_Note: Requires RAM Hydraulic Bearing PN[78180}
    • Liter: 6.2
    • SubModel: SS
    • CUI: 376
    • EngineType: V8 ( 6.2 L / 376 )

    1998 CHEVROLET CORVETTE

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • EngineType: ALL
    • SubModel: INDIANAPOLIS 500 PACE CAR

    2003 CHEVROLET CORVETTE

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • EngineType: ALL
    • SubModel: 50TH ANNIVERSARY EDITION PACE CAR

    1998-2002 CHEVROLET CAMARO

    • Fitment_Note: RAM Hydraulic Bearing PN[78165] And/Or ADj. Master Cyl PN[510] Recommended
    • Liter: 5.7
    • SubModel: Z28 SS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2012 CHEVROLET CORVETTE

    • CC: 6162
    • Liter: 6.2
    • SubModel: BASE
    • CUI: 376
    • EngineType: V8 ( 6.2 L / 376 )

    2004-2007 CADILLAC CTS

    • Fitment_Note: RAM Hydraulic Bearing PN[78170] Recommended~If Using OEM Slave/Bearing Requires Spacer Plate RAM PN[78511]
    • EngineType: ALL
    • SubModel: V
    Items You Need
    Items You May Also Consider

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List