Ram Clutches 78160 - RAM Hydraulic Throwout Bearings
Ram Clutches #798-78160Hydraulic Throwout Bearing |
||||
|
|
||||
|
|
||||
Ram Clutches 78160 - RAM Hydraulic Throwout Bearings Details
Throwout Bearings
The T-56 bearing is designed for use in retrofit or custom applications with GM engines. Early engine applications require a transmission spacer with the T-56. Check with your transmission supplier. This kit contains all mounting hardware, fittings and remote bleeder. This bearing requires a 3/4-inch master cylinder. 2'' Compressed length with .700'' maximum travel.
RAM hydraulic release bearings are designed for stock applications, kit car build ups, or circle track. The bearing is a floating design and installation is simple and quick. Optimal uses for this bearing are circle track cars utilizing stock style clutches, or any project car in which fitting mechanical linkage is not possible. The bearing requires a minimum 3/4'' or larger bore master cylinder and a -3AN feed line to run from the master to the bearing. A remote bleeder kit is available to make bleeding simple from outside the bellhousing. All parts necessary for rebuild are available from RAM.
