FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Ridetech 11060399 - Ridetech 1958-64 Chevy Impala Air Suspension System

Ridetech 11060399 - Ridetech 1958-64 Chevy Impala Air Suspension System

Ridetech#029-11060399

1959-64 Chevy Impala / Bel Air /
Caprice Air Suspension System
  • Level 3 Package

    Ridetech 11060399 - Ridetech 1958-64 Chevy Impala Air Suspension System Details

    LEVEL 3 package

    This package includes:

  • Master Series Double Adjustable ShockWaves - Front
  • Master Series Double Adjustable Shocks - Rear
  • CoolRide Air Springs & Brackets - Rear
  • Upper & Lower Strongarms - Front & Rear
  • Adjustable Panhard Bar
  • Billet Tie Rod Adjusters
  • MuscleBar Sway Bars - Front & Rear
  • RidePro Digital 4-way AirPod, 5-Gallon Tank, Dual Compressors
  • LevelPro Sensors
  • Handheld Remote Control Option
  • All mounting Hardware, Air Lines, Fittings, Instructions, etc...



    Front Benefits:

    1. Additional caster built into the arm so that the car drivers better, especially at higher speeds.
    2. The RideTech front Muscle Bar will clear all steering box configurations, whether it is a manual, slave cylinder, or 605 setup.
    3. The Coolride shock mount is bolt on for an easier installation.
    4. New billet lower cross shafts.
    5. RideTech has built in adjustable steering stops for different tire combinations especially if you are running Coolride.
    6. This is one on the easiest cars to put air ride on.

    Rear Benefits:

    1. The panhard is adjustable so you can optimize your tire clearance at the new lowered height.
    2. The upper arm for the 59-64 is bent to provide additional clearance of the axle tube.

    Included Hardware:

    Front ShockWaves

  • 2- 255 bellows
  • 2- internal bumpstop
  • 2- 4.1'' stroke bearing shock (Double Adjustable)
  • 4- threaded bead ring
  • 2- threaded upper mount for 255
  • 2- threaded lower mount for 255
  • 4- small o-ring
  • 4- large o-ring
  • 2- Swivel stud top
  • 2- 5/8'' SAE Nylok Nut Upper shockwave mount
  • 2- 1/4'' x 1/4'' swivel elbows

    Front Upper Strong Arms
  • 1- Passenger side Upper Arm
  • 1- Driver side Upper Arm
  • 2- Ball Joints
  • 2- Bushing Kits (4 pieces)
  • 2- Upper Cross Shaft

    Front Lower StrongArms for ShockWaves
  • 2- Cross shaft
  • 2- Cross shaft clamp
  • 4- Lower control arm bushings
  • 1- Drivers side steering stop
  • 1- Passenger side steering stop
  • 1- Driver side lower Arm
  • 1- Passenger Side Arm
  • 2- Ball Joints
  • 4- Lower aluminum spacers
  • 4- 5/16'' X 1'' USS bolts Steering stop to Lower Control Arm
  • 4- 5/16'' SAE Flat Washers Steering stop to Lower Control Arm
  • 4- 5/16'' Nylok Nut Steering stop to Lower Control Arm
  • 2- 3/8'' x 6-1/2'' USS bolt Sway bar end link
  • 2- 3/8'' nylocs Sway bar end link
  • 2- Grease fittings
  • 2- 1/2'' x 3'' SAE grade-8 bolts Shockwave to lower arm
  • 2- 1/2'' SAE Nylok Shockwave to lower arm
  • 4- 7/16'' x 2'' SAE grade-8 bolt Lower arm cross shaft clamp to frame
  • 4- 7/16'' x 1-1/4'' SAE grade-8 bolt Lower arm cross shaft
  • 4- 1/2'' Fender washer Lower arm cross shaft
  • 8- 7/16'' lock washer Lower arm cross shaft & clamp
  • 4- 3/8'' x 1-1/4'' SAE Grade-8 bolt Upper cross shaft
  • 4- 3/8'' Fender washer Upper cross shaft

    Rear CoolRide Air Spring Kit with StrongArm Tubular Control Arms
  • 2- (224 style) rear air spring
  • 1- Driver side upper air spring bracket
  • 1- Passenger side upper air spring bracket
  • 2- Rear shock with 2 sleeves----no studs
  • 2- Lower control arm w/ air spring mount
  • 1- Upper control arm
  • 1- Panhard bar
  • 1- Pressed into panhard bar
  • 2- Aluminum T bushing
  • 1- Panhard bar rod end
  • 1- Panhard bar stud
  • 6- Bar bushings
  • 6- Bar bushings
  • 6- Bushing sleeve
  • 2- Bumpstop extension
  • 2- Short bumpstops
  • 2- 7/16'' x 6'' stud Upper air spring bracket to frame
  • 2- 7/16'' flat washer
  • 2- 7/16'' USS nyloc
  • 4- 3/8'' USS nyloc Upper air spring bracket
  • 8- 3/8'' flat washer
  • 2- 3/8'' x 3/4'' USS bolt Lower air spring mounting
  • 4- 3/8'' lock washer
  • 2- 3/8'' x 1'' USS bolt Bumpstop extension
  • 1- 5/8'' SAE thin nyloc nut Panhard bar stud
  • 2- 5/8'' USS flat washer
  • 1- 9/16'' USS flat washer
  • 1- 3/4''-16 Jam nut
  • 6- 5/8'' x 3-1/2'' SAE Grade-8 bolt Upper and lower arms
  • 6- 5/8'' SAE Nylok jam nut Upper and lower arms
  • 1- 9/16'' SAE Nylok Nut Panhard bar

    Front & Rear MuscleBar Sway Bars
  • 1- 1-1/4'' Diameter sway bar
  • 2- Sway bar arms
  • 1- Driver side frame bracket
  • 1- Passenger side frame bracket
  • 2- 1-1/4'' I.D. Polyurethane bushing
  • 2- 12mm straight PosiLink
  • 2- 12mm 90-degree PosiLink
  • 2- 12mm stud PosiLink (use Loctite)
  • 2- A1001 T-bushing for lower control arm
  • 2- Grease fittings
  • 1- Tube of lithium grease
  • 4- 12mm Nylok nut PosiLink
  • 2- 7/16'' SAE flat washer PosiLink to lower arm
  • 6- 7/16'' x 1'' USS bolt Frame bracket to frame
  • 6- 7/16'' USS Nylok nut Frame bracket to frame
  • 12- 7/16'' SAE flat washer Frame bracket to frame
  • 4- 3/8'' x 1'' USS bolt Frame bracket to frame
  • 4- 3/8'' SAE flat washer Frame bracket to frame
  • 8- 3/8'' x 1'' USS button head Attaches sway bar arm to bar
  • 8- 3/8'' lock washer Attaches sway bar arm to bar

    LevelPro AirPod Compressor System
  • 1- 5-gallon AirPod
  • 1- RidePro Digital Display
  • 2- 6-32 x 3/8'' Phillips pan head screw for display
  • 1- Display Harness
  • 1- Height sensor harness (2 short - 2 long)
  • 4- Height sensor
  • 10- Heat shrink tubes
  • 4- Hardware kit for height sensor (includes the following)
  • 1- Steel linkage rod
  • 2- Rubber rod ends
  • 2- 1/4'' sensor bolts w/ Nyloc nuts & flat washers
  • 1- Mounting tab
  • 1- External power harness
  • 1- Fuse holder
  • 1- 40 amp fuse
  • 1- #10 Yellow butt connector
  • 1- #10 5/16'' eye connector
  • 2- 30' roll of 1/4'' airline
  • 4- 1/4'' npt x 1/4'' airline fitting

  • Ridetech 11060399 - Ridetech 1958-64 Chevy Impala Air Suspension System

    Three Choices of Everything You'll Need!

    Ridetech has made it even easier to "bag" your Impala (or B-body) by putting their quality engineered components into three different levels of complete packages for your car. No matter which one you choose, you will dramatically improve your handling and performance, while getting "down" with attitude, the way you want and your budget allows.





    LEVEL 1 package
     
    The LEVEL 1 system offers a more economical solution to gain the advantage of riding on air. It is the perfect choice if you just want to cruise your car to the shows. And with the upgrade options can be later equipped for any performance level.
    The CoolRide front & rear systems consist of an airspring, a shock absorber, and all of the necessary mounting brackets and hardware. The front & rear systems are very simple to install with the airspring and new shock absorber replacing the old coil-spring and shock on the factory control arms. The front shock is relocated outside the control arm but the supplied shock bracket does not require welding, instead it is simply bolted on to the chassis. CoolRide offers great ride quality and years of reliable service.
    The 3-gallon analog compressor kit allows true 4-way independent adjustment with the use of the RidePro valve body. It comes with easy to use analog gauges and electronic switches for accurate control while keeping operation simple and inexpensive.
     

    FRONT components:
  • CoolRide for factory control arms
  • Black Series Shocks
  • REAR components:
  • CoolRide for factory control arms
  • Black Series Shocks
  • AIR system:
  • RidePRO manual control
    4-way compressor system
  • Single Compressor
  • 3-gallon Tank




  • LEVEL 2 package
     
    The LEVEL 2 system has a couple of upgrades, over the level 1 package, that helps you to improve your next air-road experience.
    First, Master Series Single Adjustable Billet ShockWaves on the front and Master Series Shocks on the rear that lets you adjust your shocks rebound rate for better ride quality and handling performance.
    Second, new tubular StrongArms, front and rear, that provide a cleaner appearance and superior strength over the factory front and rear control arms. The front StrongArms have an optimized ball joint angle to ensure no binding during extreme suspension travel. The rear StrongArms also include an adjustable Panhard Bar.
    The last upgrade is to the air system. Level 2 upgrades you to the RidePro Digital electronic controls offer three system air pressure presets to provide accurate adjustments with the touch of just one button on the digital control panel. And a 5-gallon air tank attached to dual compressors provide a quicker rise time.
     

    FRONT components:
  • Master Series Single Adjustable Billet ShockWaves
  • Upper & Lower StrongArms
  • REAR components:
  • CoolRide Air Springs & Brackets
  • Master Series Single Adjustable Billet Shocks
  • Upper & Lower StrongArms & Panhard Bar
  •     (Upper Bar 1958) (Upper Bar & Panhard 1959-64)
    AIR system:
  • RidePro Digital Control
    4-way Air Compressor System
  • Dual Compressors
  • 5-gallon Tank




  • LEVEL 3 street challenge package
     
    The LEVEL 3 street challenge system throws all the goodies Ridetech has to offer at your car! LEVEL 3 adds Master Series Double Adjustable Billet ShockWaves, front and rear, that let you adjust your shock rates with 24 compression clicks and 36 rebound clicks for better ride quality and handling performance.
    You also get MuscleBar sway bars, Billet Tie Rod Adjusters, and the AirPod LevelPro 5-gallon, dual compressor system to put your car right alongside any modern day performance cars that you care to play with...and that brings a big grin that can't be smacked off your face.
     

    FRONT components:
  • Master Series Double Adjustable Billet ShockWaves
  • Upper & Lower StrongArms
  • Billet Tie Rod Adjusters
  • MuscleBar Sway Bar with Posi-Links

  • REAR components:
  • CoolRide Air Springs & Brackets
  • Master Series Double Adjustable Billet Shocks
  • Upper & Lower StrongArms & Panhard Bar
  • MuscleBar Rear Sway Bar
  • (Upper Bar 1958) (Upper Bar & Panhard 1959-64)
    AIR system:
  • RidePro Digital Control
    4-way AirPod System
  • Dual Compressors
  • 5-gallon Tank
  • LevelPRO Sensors
  • Remote Control Option



  • Look at the slight amount of body roll in this heavy Impala as it navigates this high speed right hand turn,
    ...With FOUR people in the car, WOW!!!

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69