Boost Valve Kits
- Valve
- Sleeve
- O-Rings (3)
When rebuilding high performance or heavy-duty Ford C6 transmissions, it is common to find a worn boost sleeve in the clicker type valve body. This wear causes poor line rise, which results in erratic shift timing, reverse shudder or direct clutch failure. This can be caused by the reciprocating boost valve wearing the inside diameter of the boost sleeve. When this occurs, oil that enters the modulated line pressure orifice leaks past the boost valve and exhausts through the reverse orifice, resulting in poor or no line rise. The outside diameter of the boost sleeve may allow some leakage through the valve body, which can result in insufficient line rise. Sonnax boost valve kit 36941-01K to eliminates the above problems. Replace the boost valve and sleeve to restore performance and to reduce the chance of premature failure.
- Fits clicker-style units only, '76-earlier
- Sleeve is manufactured from highly wear-resistant aluminum alloy
- Hardcoat anodized valve combats premature wear
- Normal line pressure boost (gas ratio): Kits 36946-01K, 36946-04K and 36941-01K.
- Increased line pressure boost (diesel ratio): Kits 36946-02K and 36946-03K are recommended for all heavy-duty applications.
- Kit 36941-01K works in early model "clicker" versions with screw on boost valve end plate.
- Kits 36946-01K, 36946-02K and 36941-01K include O-rings to provide additional protection against both cross leakage and oil exhausting through the valve body bore.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.