Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

PJ1 SP106

Flameproof Coating Flat Silver

PJ1 SP106


ORMD Item - Ground Shipping Only
made in usa
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
PJ1 SP106 Flameproof Coating Flat Silver $10.99
Flameproof Coating
  • Flat Silver
  • 11 oz Aerosol

  • PJ1 SP106 Details


  • Features EZ Touch Conical Nozzle
  • Renew And Extend High Temperature Surfaces
  • Unique Silicone Ceramic Coating
  • Ceramic Resins Resist Heat Up To 2000° F
  • Dry To Touch In 30 Minutes / Handle In 1 Hour
  • Ideal For Headers Manifolds And Exhaust Systems
  • Must Be Properly Cured For Maximum Performance

  • Specifications:

    Extremely High Temperature
    Low VOC
    Paint Finish
    Paint Type
    Flameproof coating
    Primary Paint Color
    Sold individually
    Volume (oz.)
    Manufacturer's Part Number:

    VHT Flame Proof Paint Coating was originally developed some 30 years ago and is now used as a protective paint coating for the white-hot surfaces of space-bound and re-entry vehicles.
    Since its inception, numerous industrial, automotive, and electrical engineers have developed new ideas for applications of VHT flameproof paint. These include aerospace hardware, smoke stacks, jet engines, heat exchangers, boilers, heaters, exhaust manifolds, mufflers, steam pipes, barbecues, electrical hardware, and countless other applications where resistance to high temperatures and/or weathering is required.

    Flame Proof Paint Application: Apply a THIN, even coat of VHT FlameProof Paint - just enough to thoroughly COLOR. Excessive build-up is not necessary or recommended. In applications requiring heavy coating, build-up should be done in stages, each successive coat being cured as recommended below. Nominal coating wet thickness .0015'' - .002''.

    VHT FlameProof paint coatings require no primer. For most economical use of VHT FlameProof colors on ''hard to hide'' surfaces, apply a thin coat of VHT FlameProof White or VHT FlameProof Silver base coating.

    Curing: VHT FlameProof coatings will air dry in 15 to 30 minutes and if handled with reasonable care, may be put to immediate use. Heat curing method for maximum resistance to solvents, salt spray, humidity, thermal shock and heat:

  • 15 minutes at 250°F
  • 30 minutes at 600°F
  • 1 hour at 800°F
  • 30 minutes at 1,000°F

    On non-traffic surfaces and where solvent resistance is not required, VHT FlameProof coatings may be used as air-dried. Curing may be accomplished by the inherent heat of operation such as encountered in engine manifolds and exhausts, boilers, heaters, etc. or by following the curing instructions below.

    On the Vehicle

  • Paint must be completely dry before curing
  • Run at idle for 10 minutes
  • Cool for 20 minutes
  • Run at idle for 20 minutes
  • Cool for 20 minutes
  • Run under normal operating conditions for 30 minutes

    Off the Vehicle

  • Paint must be completely dry before curing
  • Heat to 250°F (121°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 400°F (204°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 650°F (343°C ) for 30 minutes

    Curing VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

  • SP106 - VHT Flame Proof Paint is rated 5.0 out of 5 by 2.
    Rated 5 out of 5 by from Looks great ! Stick to instructions and it will come out right. I painted them off the truck , then carefully put them back on, touching them up as needed. Run the truck as spec. they will look great
    Date published: 2014-11-02
    • y_2018, m_2, d_23, h_9
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_1
    • loc_en_US, sid_10001_10001_51574, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need