Instant Rebates
800.345.4545
Call Our Support Line
24 Hours / 7 Days a Week!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

VHT SPB102

Flameproof Coating Flat Black

VHT SPB102

322-SPB102

ORMD Item - Ground Shipping Only
made in usa
jegs shipping
Ships
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
VHT SPB102 Flameproof Coating Flat Black $31.99
Flameproof Coating
  • Flat Black
  • 1 Quart

  • VHT SPB102 Details

    Quart

  • Renew And Extend High Temperature Surfaces
  • Unique Silicone Ceramic Coating
  • Ceramic Resins Resist Heat Up To 2000° F

  • Specifications:

    Color
    Black
    Application
    Extremely High Temperature
    Manufacturer's Part Number:
    SPB102

    VHT Flame Proof Paint Coating was originally developed some 30 years ago and is now used as a protective paint coating for the white-hot surfaces of space-bound and re-entry vehicles.
    Since its inception, numerous industrial, automotive, and electrical engineers have developed new ideas for applications of VHT flameproof paint. These include aerospace hardware, smoke stacks, jet engines, heat exchangers, boilers, heaters, exhaust manifolds, mufflers, steam pipes, barbecues, electrical hardware, and countless other applications where resistance to high temperatures and/or weathering is required.

    Flame Proof Paint Application: Apply a THIN, even coat of VHT FlameProof Paint - just enough to thoroughly COLOR. Excessive build-up is not necessary or recommended. In applications requiring heavy coating, build-up should be done in stages, each successive coat being cured as recommended below. Nominal coating wet thickness .0015'' - .002''.

    VHT FlameProof paint coatings require no primer. For most economical use of VHT FlameProof colors on ''hard to hide'' surfaces, apply a thin coat of VHT FlameProof White or VHT FlameProof Silver base coating.

    Curing: VHT FlameProof coatings will air dry in 15 to 30 minutes and if handled with reasonable care, may be put to immediate use. Heat curing method for maximum resistance to solvents, salt spray, humidity, thermal shock and heat:

  • 15 minutes at 250°F
  • 30 minutes at 600°F
  • 1 hour at 800°F
  • 30 minutes at 1,000°F

    On non-traffic surfaces and where solvent resistance is not required, VHT FlameProof coatings may be used as air-dried. Curing may be accomplished by the inherent heat of operation such as encountered in engine manifolds and exhausts, boilers, heaters, etc. or by following the curing instructions below.

    On the Vehicle

  • Paint must be completely dry before curing
  • Run at idle for 10 minutes
  • Cool for 20 minutes
  • Run at idle for 20 minutes
  • Cool for 20 minutes
  • Run under normal operating conditions for 30 minutes

    Off the Vehicle

  • Paint must be completely dry before curing
  • Heat to 250°F (121°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 400°F (204°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 650°F (343°C ) for 30 minutes

    Curing VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

  • Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List