Vortech V-3 Supercharger Oil Lubricant
933-009035
Product Q&A
View Now
| Ratings |
|---|
| Price |
| Brand |
Oil & Lubricant
1. Ensure that the .06" copper sealing washer is located on the dipstick base.
2. Thread the clean dipstick into the unit until it seats.
3. Once the dipstick has seated, remove the dipstick from the unit. Fluid should register in the crosshatched area on the dipstick.
4. DO NOT OVERFILL!! Drain excess fluid from the unit if it is above the maximum level on the dipstick V-3 Maintenance Notes
1. Check the supercharger fluid level using the dipstick at least every 2,500 miles.
2. Initial supercharger fluid change must be performed at 2,500 miles. The supercharger fluid must then be changed at least every 7,500 miles.
- Drain the fluid, re-fill the unit only with 4 oz. of Vortech lubricating fluid.
- Confirm proper oil level using the dipstick. DO NOT OVERFILL!!
Specifications:
![ZPM Break-In Engine Oil Additive/Assembly Lubricant [Each]](https://www.jegs.com/images/photos/400/466/466-99000.jpg){kind=small}
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.