0
0
×
Account Login
1-800-345-4545
Gift Cards
Track Order
Help Center
PRODUCT DISCONTINUED
Unpublished Item

Weiand 174 Series Pro-Street Supercharger Kit Small Block Ford 289/302

925-77-174FSB-1

made in usa

Product Q&A
View Now
Click image to zoom
174 Series Pro-Street Supercharger Kit Small Block Ford 289/302
174 Series Pro-Street Supercharger Kit
  • Small Block Ford 289/302
  • 10-Rib Pulley Width
  • Drive Ratio W/ Included Pulleys: 1.60:1
  • Satin Finish
  • Currently unavailable.
    This product is not available, please call customer service for options, at 1-800-345-4545.
    77-174FSB-1 is rated 5.0 out of 5 by 3.
    Rated 5 out of 5 by from Great addition Installed this about 3 weeks ago so far so good lots of power.
    Date published: 2020-04-13
    Rated 5 out of 5 by from Awesome performance For everyone wondering, I installed this in a factory v8 falcon with a stock hood and it fits with a 1.00 drop airfilter.
    Date published: 2019-03-21
    Rated 5 out of 5 by from Very nice piece Installed this on a 289 in a 65' Mustang. Definitely added lots of power. Easy to install. The only tough part is the idler assembly. Was able to retain mechnical fan. Fantastic!
    Date published: 2019-01-18
    • y_2024, m_4, d_22, h_4
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_US, sid_10001_10001_456136, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Will this fit a 1970 ford torino gt 351c? How much additional power could I get out of this supercharger?

    Asked by: Junior
    The Weiand 925-77-174FSB-1 supercharger does not fit a 351C.
    Answered by: jshook
    Date published: 2022-12-22

    How much boost would this average? 

    Asked by: MillerTime316
    There is a chart listed in the instruction that shows the boost levels with the different available pulley kits. Here is a link to the instruction - https://www.jegs.com/InstallationInstructions/900/925/925-77-174FSB-1.pdf
    Answered by: Rusty B
    Date published: 2018-05-02

    I have a 1990 ford f150 4x4. It has a built full roller 351 with a carb. Im not sure which 351 it is. Ill find out this week. Will this blower work? And what carb is recommended for max power?

    Asked by: Colby11
    You will need to verify that your is a 351W for this to work. We would recommend a 750 CFM or 650 CFM depending on the RPM you run.
    Answered by: Rusty B
    Date published: 2018-03-26

    I’ve read that this blower is only compatible with carbureted applications, but would it be compatible with a TBI unit like specifically a Holley Sniper setup?

    Asked by: Jason D
    Yes it will work with the proper TBI style kit, you will need to program it correctly for proper performance.
    Answered by: Rusty B
    Date published: 2023-08-12

    I have a 87 mustang lx 331 with afr heads the car has a 4 inch cowl hood will this fit under the hood and will it work with my combo it is a carberated car 750 holly dp

    Asked by: Phantommustang87
    Yes, this kit should work fine and should also clear the cowl hood.
    Answered by: Rusty B
    Date published: 2024-02-22

    Would I have to carb my 95 Ford Bronco for this to fit

    Asked by: jcasey
    Yes, this is for carburetor engines only.
    Answered by: Jon Jegs Tech
    Date published: 2018-02-02

    I have a 1994 ford f350 I'd like to put this on will it work?

    Asked by: Bowman
    This would bolt to the cylinder heads of that application but requires the use of a carburetor, which you would need to convert your engine and fuel system to in order to achieve proper operation.
    Answered by: RobZ
    Date published: 2017-12-01

    How long is the 174 blower drive housing from the end of the pulley to the mounting flange on the blower unit ? Trying to figure out if it will fit our 302 powered 68 Ford Galaxie 500 without interfering with the radiator & fan .

    Asked by: td25c
    The snout dimension is approximately 13 3/16" long from the case.
    Answered by: Rusty B
    Date published: 2018-01-21
    • y_2024, m_4, d_23, h_5CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_11
    • loc_en_US, sid_10001_10001_456136, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.