FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

World Products 042660-1 - World Products Small Block Chevy S/R Torquer Cast Iron Cylinder Heads

World Products 042660-1 - World Products Small Block Chevy S/R Torquer Cast Iron Cylinder Heads

World Products#955-042660-1

Small Block Chevy S/R Torquer Cast Iron Cylinder Head
  • 170cc Intake Ports
  • 67cc Combustion Chambers
  • 2.020'' Int/1.600'' Exh Valves
  • 1.250'' Valve Springs, .560'' Max Lift for Hydraulic Cam
  • Assembled, Sold Individually

    World Products 042660-1 - World Products Small Block Chevy S/R Torquer Cast Iron Cylinder Heads Details

    Small Block Chevy 327-400ci S/R Torquer Cast Iron Cylinder Heads

    1.250'' single spring, 100# @ seat, .560'' max. lift, 2.02 x 1.600 valves, 170cc intake runner.

    Material: High density cast iron
    Valve Seats: Integral intake,hardened steel exhaust
    Valve Size: 2.020'' x 1.600'' (1.940'' x 1.500'' for S/R Torquer 305
    Accessory Flange: Stock locations, 7-bolt universal pattern

    Included In Assembly: Erson stainless steel, ring and band valve seals, valve springs, Erson 7° retainers and keepers.

    Recommended Installation Items:

    Head Gaskets: Fel-Pro #1003 (265-350) or equivalent.
    Puhshrods: OEM can be used. Hardened not required
    Screw-in Studs: 3/8" with 7/16"-14 base thread
    Pushrod Guidplates: These heads are not machined for guide plates. If desired Flat 5/16" Erson 601 or equivalent can be used after .125" is milled off the stud bosses and the push rod holes opened
    Spark Plugs: Accepts 14mm-5/8'' .460'' reach tapered seat (Accel 274 or 276, AC-Delco 43TS or 44TS, Champion #670 or #802) or equivalent
    Intake Gasket: Fel-Pro #1204 or #1256 or equivalent
    Exhaust Gasket: Fel-Pro #1404 or #1405 or equivalent

    World Products 042660-1 - World Products Small Block Chevy S/R Torquer Cast Iron Cylinder Heads

    Bolt-On Up To 30HP!

    An improved replacement for the factory Chevrolet 305-400ci cylinder head, World Products exclusive S/R Torquer series features 170cc intake runners and can provide up to a 30 HP increase over most OEM castings. Note, however, that these heads are accepted by many racing associations as ''stock'', and are 50-state emissions legal. S/R Torquer heads accept early and late model accessories. The valve seats are hardened to provide compatibility with unleaded gas. The S/R Torquer heads are available in 67cc and 76cc versions for engines up to 1986 and 76cc for 1987-later applications. They are designed to use 2.020'' intake and 1.600'' exhaust valves, and work well in engines from 302 to 400ci. World's S/R Torquer 305 cylinder heads come with 58cc combustion chambers, and are ideally suited for use on 262-307ci small blocks.

    Technical Specifications
  • Material: High density cast iron
  • Valve Seats: Integral intake, hardened steel exhaust
  • Valve Size: 2.020'' x 1.600''
  • Accessory Flange: Stock locations, 7-bolt universal pattern
  • Included In Assembly: Erson stainless steel, ring and band valve seals, valve springs, Erson 7° retainers and keepers.

    Recommended Installation Items
  • Head Gaskets: Fel-Pro 375-1003 or equivalent
  • Pushrods: OEM can be used, hardened not required
  • Screw-in Studs: 3/8" or 7/16" with 7/16"-14 base thread
  • Pushrod Guidplates: These heads are not machined for guide plates. If desired Flat 5/16" Erson 601 or equivalent can be used after .125" is milled off the stud bosses and the push rod holes opened
  • Spark Plugs: Accepts 14mm-5/8'' .460'' reach tapered seat (Accel 274 or 276, AC-Delco 43TS or 44TS, or equivalent)
  • Intake Gasket: Fel-Pro 375-1204 or 375-1256 or equivalent
  • Exhaust Gasket: Fel-Pro 375-1404 or 375-1405 or equivalent

  • World Products 955-042660-1

    Manufacturer's Part Number:
    WPI042660-1
    JEGS Performance Products 80521 - JEGS Premium Stud Mount Valve Spring Compressor Tool
    Only $48.99

    JEGS Performance Products 80524 - JEGS Top Dead Center Locator
    Only $9.99

    JEGS Performance Products 80518 - JEGS Stud Mount Valve Spring Compressor Tool
    Only $25.99

    JEGS Performance Products 80900 - JEGS Port and Polish Kit
    Only $34.99


    See All Items You Need