Caspers Electronics Manual Coolant Fan Controller
The module attached to the wiring bulkhead on the passenger side fender well. Be sure to attach grounding ring to frame bolt on the inner fender strut near the module location. Control switch can be conveniently mounted in the passenger compartment for instant high and low control of the coolant fan. Switch requires 1/4'' mounting holes and must be fed through the firewall via detachable harness. Alternate installation can be achieved by routing wiring harness through door the door jam into passenger compartment center switch position is ''Normal''. notched position is ''High'' and switch opposite of high speed is ''low'' speed override.