FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Clevite 77 Ford High-Performance Bearings


Clevite
Clevite 77 Ford High-Performance Bearings

Product images may differ from actual product appearance.

These Tri-Metal 77 engine bearings combine the strength of a copper-lead alloy layer with steel backing and an electroplated babbitt metal. The steel backing provides strength and durability; the babbitt overlay provides the critical surface characteristics of slipperiness and conformability. This ideal design has properties not even found in many original equipment bearings. Clevite offers main bearings, rod bearings and cam bearings in this series.

H Series -
  • Best to start with when unsure which bearing to choose
  • Medium level of eccentricity and high crush
  • Enlarged chamfers for greater crankshaft fillet clearance
  • Made without flash plating for better seating
  • Use with crankshafts that have oversized fillets
  • Use with engines that run mid-high RPM range
  • Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface

    P Series -
  • Typically the greatest level of eccentricity
  • Rods and mains have high crush for maximum retention
  • Most are fully grooved to maximize oil flow to rod bearings
  • Reduced overlay thickness to prevent overlay fatigue
  • Use where extremely high RPMs cause severe rod bore close-in
  • Use where higher eccentricity is desired to narrow bearing contact patterns

    V Series -
  • This series essentially duplicates Clevite's former Vandervell parts
  • Typically low to medium eccentricity
  • Not available with oversized chamfers
  • No flash plating on the steel back
  • All Clevite main bearing sets use a single-piece thrust bearing
  • Narrowed parts available to accommodate increased crankshaft fillet clearance
  • Lead-indium overlay offers slightly better conformability

    M Series -
  • These are special purpose bearings having a nominal .005" thick Babbitt lining on a hardened steel back
  • They are intended mainly for Blown Fuel engines where severe crankshaft deflections cause edge loading of the bearings
  • Under these operating conditions bearing service life will be very short
  • Frequent inspection and replacement is recommended


    Part Number Key
    • H - High-Performance
    • HD - High-Performance bearing with dowel hole
    • HK - High-Performance bearing with moly/graphite coating
    • P - Standard Clevite 77 tri-metal bearing
    • M - Blown Fuel Engine bearing for severe crankshaft deflections & edge loading
    • N - High-Performance Narrowed for greater crankshaft fillet clearance
    • HG - High-Performance full angular grooved bearing
    • V - High-Performance with Lead Indium overlay (On Main Sets this indicates partial groove also)
    • VG - High-Performance with Lead Indium full angular grooved bearing
    • D - Bearing has a dowel hole
    • K - Tri-Armor coated bearing
    • X - Bearing has .001 more oil clearance than standard
    • XX - Bearing has .002 more oil clearance than standard
    • A or AL - Indicates Aluminum bearing material

    Note: Clevite main and cam bearings are priced as sets; rod bearings are priced each.


  • 33 Products Page: 1 2 ... |  Next Results per Page:
    Main Bearing Sets

    695-MS1010H
    Main Bearing Set
  • 1969-74 Ford 351 (5.8L) V8 Engine
  • H Series
  • Was: $107.99
    Now: $99.99
    Ships

    695-MS1010P
    Main Bearing Set
  • 1969-74 Ford 351 (5.8L) V8 Engine
  • P Series
  • $94.99
    Ships

    695-MS1010P10
    Main Bearing Set
  • 1969-74 Ford 351 (5.8L) V8 Engine
  • P Series
  • -.010"
  • $94.99
    Ships

    695-MS1010P20
    Main Bearing Set
  • 1969-74 Ford 351 (5.8L) V8 Engine
  • P Series
  • -.020"
  • $94.99
    Ships

    695-MS1039P
    Main Bearing Set
  • 1968-97 Ford 370/429/460 (6.1/7.0/7.5L) V8 Engines
  • P Series
  • Was: $68.99
    Now: $60.99
    Ships

    695-MS1039P1
    Main Bearing Set
  • 1968-97 Ford 370/429/460 (6.1/7.0/7.5L) V8 Engines
  • P Series
  • $68.99
    Order Today Ships 12/26/14

    695-MS1039P10
    Main Bearing Set
  • 1968-97 Ford 370/429/460 (6.1/7.0/7.5L) V8 Engines
  • P Series
  • -.010"
  • Was: $68.99
    Now: $57.99
    Ships

    695-MS1039P20
    Main Bearing Set
  • 1968-97 Ford 370/429/460 (6.1/7.0/7.5L) V8 Engines
  • P Series
  • -.020"
  • Was: $68.99
    Now: $63.99
    Ships

    695-MS1039P30
    Main Bearing Set
  • 1968-97 Ford 370/429/460 (6.1/7.0/7.5L) V8 Engines
  • P Series
  • -.030"
  • $68.99
    Order Today Ships 12/26/14

    695-MS1039P40
    Main Bearing Set
  • 1968-97 Ford 370/429/460 (6.1/7.0/7.5L) V8 Engines
  • P Series
  • -.040"
  • $69.99
    Order Today Ships 12/26/14

    695-MS1039V
    Main Bearing Set
  • 1968-97 429/460 (7.0/7.5L) V8 Engines
  • V Series
  • Was: $94.99
    Now: $74.99
    Order Today Ships 12/23/14

    695-MS1039V10
    Main Bearing Set
  • 1968-97 429/460 (7.0/7.5L) V8 Engines
  • V Series
  • -.010"
  • $93.99
    Ships

    695-MS1117P
    Main Bearing Set
  • 1974-97 Ford 2.3L 4 Cyl Engine
  • P Series
  • $58.99
    Order Today Ships 12/26/14

    695-MS1432H
    Main Bearing Set
  • 1969-97 Ford 351/400 (5.8/6.6L) V8 Engines
  • H Series
  • Was: $94.99
    Now: $86.99
    Ships

    695-MS1432HX
    Main Bearing Set
  • 1977-97 Ford 351/400 (5.8/6.6L) V8 Engines
  • H Series
  • $93.99
    Order Today Ships 12/26/14

    695-MS1432P20
    Main Bearing Set
  • 1971-95 Ford 351 (5.8L) V8 Engine
  • P Series
  • -.020"
  • $52.99
    Ships

    695-MS1743P
    Main Bearing Set
  • 1974-97 Ford 2.3L 4 Cyl Engine
  • P Series
  • $62.99
    Order Today Ships 12/26/14

    695-MS1983P
    Main Bearing Ses
  • 1972-89 Ford 2.8/2.9L V6 Engines
  • P Series
  • $86.99
    Order Today Ships 12/26/14

    695-MS2198AL
    Main Bearing Set
  • 1993-08 Ford (4.6L) V8 Engine
  • Aluminum
  • $73.99
    Order Today Ships 12/26/14

    695-MS590H
    Main Bearing Set
  • 1962-01 Ford 221/255/260/289/302 (3.6/4.2/4.3/4.7/5.0L) V8 Engines
  • H Series
  • Was: $104.99
    Now: $94.99
    Ships

    695-MS685P
    Main Bearing Set
  • 1964/77 Ford 390/352/427 (6.4/5.8/7.0L) V8 Engines
  • P Series
  • $99.99
    Order Today Ships 12/26/14

    695-MS742AL10
    Main Bearing Set
  • 1967-74 Ford 1.6L 4 Cyl Engine
  • Aluminum
  • -.010"
  • $71.99
    Order Today Ships 12/26/14

    695-MS863P
    Main Bearing Set
  • 1966-77 Ford 352/360/390/410/427/428 (5.8/5.9/6.4/6.7/7.0L) V8 Engines
  • P Series
  • Was: $83.99
    Now: $76.99
    Ships

    695-MS863P1
    Main Bearing Set
  • 1957-77 Ford 352/390/427/428 (5.8/6.4/7.0L) V8 Engines
  • P Series
  • Was: $89.99
    Now: $83.99
    Order Today Ships 12/26/14

    695-MS863P10
    Main Bearing Set
  • 1957-77 Ford 352/360/390/410/427/428 (5.8/5.9/6.4/6.7/7.0L) V8 Engines
  • P Series
  • -.010"
  • Was: $83.99
    Now: $71.99
    Ships

    695-MS863P20
    Main Bearing Set
  • 1957-77 Ford 330/352/360/390/410/427/428 (5.4/5.8/5.9/6.4/6.7/7.0) V8 Engines
  • P Series
  • -.020"
  • Was: $89.99
    Now: $83.99
    Order Today Ships 12/26/14

    695-MS863P30
    Main Bearing Set
  • 1957-77 Ford 352/360/390/410/427/428 (5.8/5.9/6.4/6.7/7.0L) V8 Engines
  • P Series
  • -.030"
  • Was: $89.99
    Now: $83.99
    Order Today Ships 12/26/14

    695-MS981H
    Main Bearing Set
  • 1969-97 Ford 351/400 (5.8/6.6L) V8 Engines
  • H Series
  • $74.99
    Order Today Ships 12/26/14

    695-MS981H10
    Main Bearing Set
  • 1969-97 Ford 351/400 (5.8/6.6L) V8 Engines
  • H Series
  • -.010"
  • $74.99
    Order Today Ships 12/26/14

    695-MS981P
    Main Bearing Set
  • 1969-97 Ford 351/400 (5.8/6.6L) V8 Engines
  • P-Series
  • $53.99
    Ships

    33 Products Page: 1 2 ... |  Next Results per Page: