Dynomation is a highly-refined engine simulation that considerably reduces the cost and time of engine development and testing.
Fully analyzes induction runner lengths, taper angles, port areas, and cylidnerhead flow variations.
Models combustion-chamber shapes and burn rates. Set ignition timing and ignition advance curves.
Investigates exhaust system primary and collector lengths and tubing diameters of both straight and stepped configurations.
Performs exceptional analysis of camshaft lift, duration, centerline, and lobe-separation angles. Loads and tests CamPro, CamProPlus, S96, and CamDoctor cam profile files.
Import DynoSim5, DeskTop Dyno5 engine and camfiles. Send Dynomation5 engine files to DragSim5 and FastLapSim5 for track analysis.
"Look Inside" a running engine. View and analyze intake and exhaust flow! 3D Cutaway Engine shows mass flow, port velocities, pressures-synchronized to the crank-angle data displayed in Dynomation-5.
Dynomation-5 is used worldwide by engine builders, racers, and professional race teams.
Any PC Capable of Running Windows98/Me/2000/XP or Vista (Windows95 is not supported).
A fast system processor (2GHz or faster) will improve processing speeds; especially helpful for Wave-Action and Iterative testing. However, Dynomation5 will operate on any Windows system, regardless of processor speed.
A USB Port for the Security Key required to run Dynomation5.
A minimum of 256MB of RAM (random access memory) for Windows98/Me; 512MB for Windows2000/XP, and 1GB for Vista.
A video system capable of SVGA at least 800 x 600 resolution. Recommend 1280 x 1024 or higher to optimize screen display of engine components and performance analysis graphics.
Windows-compatible printer required for test reports