Comp Cams Semi-Finished Pushrod Ends

Product images may differ from actual product appearance.

Semi-Finished Pushrods
If you don't see the exact pushrods you need in our part number listings, check out these semi-finished pushrods for the correct length and end type you need.
You will order semi-finished pushrods in two separate pieces - 1) tubes and 2) ends.
How to order semi-finished pushrods:
First, select the proper pushrod diameter.
Next, find appropriate part # for your correct tube length and add "-16" to end of part number. This will be a quantity of 16 pushrod tubes.
Select appropriate end from diagrams shown for the particular pushrod tube you ordered and add "-16" to part number. This will be a quantity of 16 ends.
With semi-finished pushrods, you must order the proper pushrod cutter to cut to length and ream the I.D. of tubing to allow for proper press fit of ends. This can be found on page 311 of this master catalog.
An example of how to order would be as follows: to order a 5/16" diameter pushrod that is 6.000" long with a 3/8" cup end, you would order the following part numbers: K6805-16 (Pushrod Tubes) 3C5P-16 (Pushrod Ends) KD516 (Cutter)