FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Competition Engineering Roll Bars and Cages for Mopar


Competition Engineering
Competition Engineering Roll Bars and Cages for Mopar

Mopar Specific Fit Roll Bars and Cages

Competition Engineering offers a variety of Roll Bars & Roll Cages to meet the different requirements of most racers. Countless hours were spent developing and perfecting these kits to offer the utmost in strength and fit without adding unnecessary weight. All tubing used exceeds the requirements of racing sanctioning bodies and is mandrel formed on computer controlled equipment for uniform wall thickness. Every Competition Engineering roll cage and roll bar kit has been designed to fit the specific application with only minor modifications necessary for installation. Welding is required.



TWO SEPARATE PART NUMBERS Are Required to Receive a Complete Roll Bar or Cage Kit (Main Hoop & Strut Kit).

8-Point Roll Bars
  • Your Choice of 1-3/4" OD x .134" Wall Mild Steel Tubing or 1-3/4" OD x .083" Wall Aircraft-Quality AMS T-6736 Chrome Moly Tubing
  • Main Hoop Kits Include: Mandrel Formed Main Hoop
  • Strut Kits Include: Two Rear Struts, Two Front Door Bars, Main Hoop Crossbrace, Two Diagonal Hoop Supports, Six Weld Joint Gussets, and Six 6" x 6" x 1/8" Thick Steel Mounting Plates
  • Tube Ends Notched for a Better Fit
  • NHRA & IHRA Approved
  • Complete Instructions Included to Ensure Hassle-Free Installation
  • Welding Required

    10-Point Roll Cages
  • Bridges the Gap Between an 8-Point Roll Bar and a 12-Point Roll Cage, Providing Increased Driver Protection During Rollover
  • Your Choice of 1-5/8" OD x .134" Wall Mild Steel Tubing or 1-5/8" OD x .083" Wall Aircraft-Quality AMS T-6736 Chrome Moly Tubing
  • Main Hoop Kits Include: Mandrel Formed Main Hoop, One Top Hoop, Two Front Down Stuts, One Main Hoop Cross Brace, Two Diagonal Hoop Supports
  • Strut Kits Include: Two Rear Struts, Two Front Door Bars, Twelve Weld Joint Gussets, and Six 6" x 6" x 1/8" Thick Steel Mounting Plates
  • Tube Ends Notched for a Better Fit
  • Meets NHRA and IHRA Requirements for Cars Running 10.99 or Quicker with Modified Firewalls and/or Floorboards
  • Complete Instructions Included to Ensure Hassle-Free Installation
  • Welding Required

    12-Point Roll Cages
  • Designed to Provide the Utmost in Chassis Strength
  • Your Choice of 1-5/8" OD x .134" Wall Mild Steel Tubing or 1-5/8" OD x .083" Wall Aircraft-Quality AMS T-6736 Chrome Moly Tubing
  • Main Hoop Kits Include: Mandrel Formed Main Hoop, One Top Hoop, Two Front Down Stuts, One Main Hoop Cross Brace, Two Forward Struts
  • Strut Kits Include: Two Rear Struts, Two Front Door Bars, Two Diagonal Hoop Supports, One Rear X-Brace Twelve Weld Joint Gussets, and Six 6" x 6" x 1/8" Thick Steel Mounting Plates
  • Superior 360° Driver Protection
  • Tube Ends Notched for a Better Fit
  • NHRA & IHRA Approved
  • Complete Instructions Included to Ensure Hassle-Free Installation
  • Welding Required


  • 1 Product
    12-Point Roll Cage
  • 2008-Up Challenger
  • This Is A Complete Custom Fit Kit. Strut Kit Is Included.

  • 247-3373
    12-Point Roll Cage
  • 2008-Up Challenger
  • 1-5/8" O.D. x .083" Chrome Moly
  • Includes Strut Kit
  • $119
    $836.99
    Order Today Ships 12/04/14

    1 Product