Newly reformulated Carb Renew2 has better fuel resistance and durability than the original formula, but still maintains that factory bronze look - Restore the OEM look found on just about any carburetor. Carb Renew2 is a translucent acrylic enamel that is resistant to fuel and most additives. (Please read and follow label instructions carefully.) While your carburetor is apart and all jets are removed, simply spray Carb Renew2 on the exterior of the thoroughly cleaned bowl cover and main body. Produces a natural 3-8% gloss. Carb Renew2 comes in a 5 oz. aerosol, enough to cover about 2 sq.ft.
Since Carb Renew is translucent, IT'S VERY IMPORTANT to thoroughly clean the surface and bring the base metal to a uniform look. Carb Renew is an acrylic enamel, covers 2 square feet, and withstands up to 300 degrees F. Use in a well ventilated area and wear a respirator. Apply in very light coats to replicate original plating