FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Eastwood Tin Zinc Electroplating System

Eastwood Tin Zinc Electroplating System

Electroplating at home is easier than you think when you use this tin zinc electroplating system. The Eastwood Tin-Zinc Electroplating System brings back the original brilliant luster to properly prepared metal parts, while providing a corrosion-resistant, protective plating similar to chrome-but without the expense, hassles or hazards. Plate almost any metal part right at home, including brass, copper, and steel (not for aluminum, die-cast, pot metal or stainless).

How it works: Make sure parts are thoroughly degreased and de-rusted before you start electroplating at home. Electroplating uses electrical current to pull small amounts of metal from the positively charged tin-zinc anode bar, through the electrolyte solution, and onto the negatively charged piece to be plated. Plating begins immediately once the piece is submerged into the solution. The longer the piece is submerged, the heavier the plating on the piece will be. You may remove the piece from the solution to check the progress and then re-submerge it for a thicker coating. The tin zinc electroplating process is complete when the piece is covered with a uniform dull gray film. Then polish to a beautiful shine.

2 Products

Tin Zinc Electroplating System
ORMD Item - Ground Shipping Only
Replacement Anode
Order Today Ships 12/01/15

2 Products