Edelbrock Performer Manifolds for Buick

Product images may differ from actual product appearance.

Idle-5500 RPM Power!

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response. Some Performer intakes are 50-state legal, when used with the correct carburetor and in the correct application.

Buick 231-252ci V6

Edelbrock 5486 - Edelbrock Performer Manifolds for Buick

350-5486

Performer Buick V6 Intake Manifold

Buick 231-252ci Even Fire 1979-up

4-bbl Square-Bore Carb Flange (non-EGR)

Idle-5500 rpm
More info on Edelbrock 5486

$193.99

350-5486K

Performer Buick V6 Intake Manifold w/Installation Kit

Buick 231-252ci Even Fire 1979-up

4-bbl Square-Bore Carb Flange (non-EGR)

Idle-5500 rpm
More info on Edelbrock 5486K

$223.99

Buick 3.5L V8

Edelbrock 2198 - Edelbrock Performer Manifolds for Buick

350-2198

Performer Buick 3.5L V8 Intake Manifold

Buick 3.5L V8

4-bbl Square Bore Carb Flange

Idle-5500 rpm
50-State Legal

$234.99

Buick 400-455ci V8

Edelbrock 2146 - Edelbrock Performer Manifolds for Buick

350-2146

Performer Buick 455 Intake Manifold

Buick 400-455ci

4-bbl Spread-Bore Carb Flange (non-EGR)

Idle-5500 rpm

50-state legal
More info on Edelbrock 2146

$267.99

350-21461

Performer Buick 455 Intake Manifold

Polished Finish

Buick 400-455ci

4-bbl Spread-Bore Carb Flange (non-EGR)

Idle-5500 rpm

50-state legal
More info on Edelbrock 21461

$444.99

Edelbrock 2515 - Edelbrock Performer Manifolds for Buick

350-2515

Buick B-4B Intake Manifold

Buick 400-455ci

4-bbl Spread-Bore Carb Flange (non-EGR)

Idle-5500 rpm
More info on Edelbrock 2515

$295.99

Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.